VOLVO
ECM-P069111 - Fan 1 Control Circuit Low. General Electrical Failures. Circuit short to ground
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
7 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Pokaż modele wg rocznika i silnika (20)
- Volvo S60 (2011–)2011Tylko silnik: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Tylko silnik: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Tylko silnik: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Tylko silnik: B4204T6
- Volvo S80 (2007–)2011Tylko silnik: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Tylko silnik: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Tylko silnik: B4164T
- Volvo V40 (2013–)2013Tylko silnik: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Tylko silnik: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Tylko silnik: B4164T
- Volvo V60 (2011–)2011Tylko silnik: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Tylko silnik: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Tylko silnik: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Tylko silnik: B4204T6
- Volvo V70 (2008–)2011Tylko silnik: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Tylko silnik: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Tylko silnik: B4164T, B4164T2
- Volvo XC60 (2009–)2010Tylko silnik: B4204T6
- Volvo XC60 (2009–)2011–2012Tylko silnik: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Tylko silnik: B4204T7
Co oznacza ten kod błędu?
The engine control module monitors the function of the electric cooling fan and has found a voltage that is too low on the signal wire. The fault lies in the signal wire between the engine control module and the cooling fan control module, or in one of those two control units. The engine may then cool less effectively.
Możliwe przyczyny
- Signal wire between the engine control module and the cooling fan control module is short-circuited to ground
- Damaged cooling fan control module
- Damaged engine control module
Co możesz zrobić
- 1Read and clear the fault code, and test-drive to see whether it returns
- 2Check that the fuse for the electric cooling fan is intact in the owner's manual
- 3Look at the signal wire between the engine control module and the cooling fan control module for chafing, pinch damage and loose contacts, especially where it may have touched the body
- 4Use a multimeter to check that the signal wire has no contact with ground (the body), with the connectors disconnected
- 5With a diagnostic tool you can read the cooling fan status in live data while the engine is running
- 6If the fault remains after these checks, have a workshop check the cooling fan control module and the engine control module
Objawy, które możesz zauważyć1
- Engine may overheat or run hotter than normal
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.