VOLVO
ECM-P069113 - Fan 1 Control Circuit Low. General Electrical Failures. Circuit open
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Pokaż modele wg rocznika i silnika (9)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo S60 (2011–)2011–2015Tylko silnik: D4162T
- Volvo S80 (2007–)2012–2015Tylko silnik: D4162T
- Volvo V40 (2013–)2013–2015Tylko silnik: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Tylko silnik: D4162T
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo V60 (2011–)2011–2015Tylko silnik: D4162T
- Volvo V70 (2008–)2012–2015Tylko silnik: D4162T
Co oznacza ten kod błędu?
The control signal from the engine control module to the cooling fan control module is too low, and the circuit is open according to the code. The fan is controlled steplessly on request from the engine control module, so when the control signal fails the fan cannot follow it. Engine cooling is then affected.
Możliwe przyczyny
- Loose connection
- Contact resistance or oxidation in the connections
- Open circuit in the signal wire
- Damaged cooling fan control module
Co możesz zrobić
- 1Read and clear the fault code and test-drive to see whether it returns
- 2Check the connections at the cooling fan control module and on the signal wire: are they secure, clean and free of oxidation?
- 3Look at the wire for open circuit, chafing and pinch damage. A loose connector may be enough to cause the fault
- 4Use a multimeter to check that the signal wire is intact between the connectors, with the connectors disconnected
- 5If you have a diagnostic tool, read the requested fan speed in live data and check whether the fan follows it while the engine runs
- 6If the fault remains, have a workshop check the cooling fan control module
Objawy, które możesz zauważyć2
- Engine may overheat or run hotter than normal
- Temperature control or air conditioning does not work
Na co może wpływać usterka2
- Electric cooling fan switched off
- Air conditioning (A/C) switched off
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.