Co oznacza kod błędu ECM-P06A04B?

Diagnostyka i definicja kodu błędu dla ECM-P06A04B (Volvo C30 (2007–2013), Volvo C70 (2006–2013), Volvo C70 (2006–2013)). Zamów naprawę w OBD Tuning.

VOLVO

ECM-P06A04B - Variable A/C Compressor Control Circuit. System Internal Failures. Over temperature

Układ

Sterownik silnika (ECM)

Modele Volvo, których dotyczy ten kod błędu

Dotyczy następujących modeli:

12 modeli

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Pokaż modele wg rocznika i silnika (40)

Co oznacza ten kod błędu?

The code indicates an over temperature in connection with the control of the A/C compressor solenoid. The solenoid is driven by an internal power stage in the control module, and the fault concerns the output of that power stage. The code is set when the control module detects the fault with the engine running and the A/C function activated.

Możliwe przyczyny

Signal line from the engine control module short-circuited to voltage
Damaged solenoid in the A/C compressor
Internal fault in the engine control module

Co możesz zrobić

1Start the engine, switch on the A/C and test-drive to see whether the fault returns
2Read and clear the fault code, and check that the air conditioning works after the test drive
3Look at the connectors and wiring to the A/C compressor solenoid for loose contacts, oxidation and chafing
4Use a multimeter to check that the signal line from the engine control module has no contact with voltage, with the connectors disconnected
5If the fault remains, have a workshop check the A/C compressor solenoid and the engine control module

Objawy, które możesz zauważyć4

The air conditioning does not get cold enough at the front
Heat at the front arrives slowly
The rear section does not get warm enough
The air conditioning does not work

Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.