Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-P06C700
    VOLVO

    ECM-P06C700 - Cylinder 3 Glow Plug Incorrect. General Failure Information. No sub type information

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    8 modeli

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Pokaż modele wg rocznika i silnika (8)
    • Volvo S60 (2011–)2014–2015Tylko silnik: D4204T5
    • Volvo S80 (2007–)2014–2015Tylko silnik: D4204T5
    • Volvo V40 (2013–)2015Tylko silnik: D4204T14
    • Volvo V40 Cross Country (2013–)2015Tylko silnik: D4204T14
    • Volvo V60 (2011–)2014–2015Tylko silnik: D4204T5
    • Volvo V70 (2008–)2014–2015Tylko silnik: D4204T5
    • Volvo XC60 (2009–)2014–2015Tylko silnik: D4204T5
    • Volvo XC70 (2008–)2014–2015Tylko silnik: D4204T5

    Co oznacza ten kod błędu?

    The control module has found a fault on glow plug 3. The glow plug heats the combustion chamber during a cold start, and when it does not work the engine becomes harder to start. The code is general and does not say what type of fault it is.

    Możliwe przyczyny

    • Short circuit in the signal wire between the glow plug relay and the glow plug
    • Damaged glow plug
    • Voltage from the glow control unit is too low

    Co możesz zrobić

    1. 1Read and clear the fault code, and test-drive with a cold engine to see whether it returns
    2. 2Check that the fuses for the glow plugs are intact in the owner's manual
    3. 3Look at the connector on glow plug 3 and the wire to it for loose contacts, corrosion and chafing
    4. 4With a diagnostic tool you can activate glowing and check in live data whether cylinder 3 is included
    5. 5Use a multimeter to check that the wire to glow plug 3 has no contact with ground (the body), with the connectors disconnected
    6. 6If the fault remains, have a workshop check the glow plug and the glow control unit

    Objawy, które możesz zauważyć3

    • Engine hard to start and cranks slowly
    • Problem noticed after use
    • Problem noticed at cold start

    Na co może wpływać usterka1

    • Glowing is switched off for the damaged glow plug

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.