VOLVO
ECM-P080600 - Clutch Position Sensor Circuit Range/Performance. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
3 modeleS60 (2011–), S80 (2007–), V70 (2008–)
Pokaż modele wg rocznika i silnika (9)
- Volvo S60 (2011–)2011–2012Tylko silnik: B5254T5
- Volvo S80 (2007–)2007–2008Tylko silnik: B5254T6
- Volvo S80 (2007–)2009Tylko silnik: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Tylko silnik: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Tylko silnik: B5254T10
- Volvo V70 (2008–)2008Tylko silnik: B5254T6
- Volvo V70 (2008–)2009Tylko silnik: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Tylko silnik: B5254T10, B5254T11
- Volvo V70 (2008–)2012Tylko silnik: B5254T10
Co oznacza ten kod błędu?
The engine control module (ECM) compares the signals from the clutch pedal position sensor and position switch and checks that they are reasonable. The code is set when one of the two signals lies outside its permitted range. It does not say what type of fault it is, only that the signals do not agree.
Możliwe przyczyny
- Position switch incorrectly fitted, misadjusted or sticking
- Contact resistance, oxidation or loose connection in the connector
- Faulty position switch
Co możesz zrobić
- 1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 2Try starting, auto-start and cruise control with the buttons and controls to see whether any of the symptoms can be reproduced
- 3Check that the clutch pedal moves freely and does not stick, and that the position sensor and position switch are firmly fixed and correctly adjusted
- 4Check that the connectors at the position sensor and position switch are firmly seated and free from oxidation and corrosion
- 5If you have a diagnostic tool, compare live data for the position sensor and switch as the pedal is pressed and released; they should agree
- 6Have a workshop carry out a more detailed check of the position sensor and position switch if these checks are not enough
Objawy, które możesz zauważyć2
- Starting and auto-start do not work
- Cruise control and its disengagement do not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.