VOLVO
ECM-P080885 - Clutch Position Sensor "A" Circuit High. Bus Signal / Message Failures. Signal above allowable range
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)
Pokaż modele wg rocznika i silnika (12)
- Volvo S60 (2011–)2011Tylko silnik: B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Tylko silnik: B4204T7
- Volvo S80 (2007–)2010Tylko silnik: B4204T6
- Volvo S80 (2007–)2011–2014Tylko silnik: B4204T6, B4204T7
- Volvo V60 (2011–)2011Tylko silnik: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Tylko silnik: B4204T7
- Volvo V70 (2008–)2010Tylko silnik: B4204T6
- Volvo V70 (2008–)2011Tylko silnik: B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Tylko silnik: B4204T7
- Volvo XC60 (2009–)2010Tylko silnik: B4204T6
- Volvo XC60 (2009–)2011–2012Tylko silnik: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Tylko silnik: B4204T7
Co oznacza ten kod błędu?
The engine control module (ECM) receives the clutch pedal position from the central electronic module (CEM) and checks that the value is reasonable. The code is set when the signal lies above the permitted range, which may be due to the position sensor, a signal wire shorted to voltage, or a fault in the CEM.
Możliwe przyczyny
- Damaged clutch pedal position sensor
- Signal wire shorted to voltage
- The fault lies in the central electronic module (CEM)
Co możesz zrobić
- 1Read the engine control module fault codes. If any of ECM-U012088, ECM-U000188, ECM-U1A1400, ECM-U000108 or ECM-U000100 is stored, investigate it first
- 2If ECM-U010482, ECM-P193582, ECM-P080582 or ECM-U042600 is stored, investigate it first, as it most likely leads to the root cause
- 3Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 4Use a multimeter to check that the wire from the sensor has no contact with positive or the supply voltage
- 5Check that the connectors at the position sensor are firmly seated and free from oxidation
- 6If the fault remains after these checks, have a workshop investigate the central electronic module (CEM), as the code points to a fault there
Objawy, które możesz zauważyć1
- Starting and auto-start do not work
Na co może wpływać usterka1
- The brake pedal must be depressed for auto-start
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.