VOLVO
ECM-P082182 - Gear Lever X Position Sensor Circuit. Bus Signal / Message Failures. Alive / sequence counter incorrect / not updated
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (6)
- Volvo S80 (2007–)2007–2009Tylko silnik: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Tylko silnik: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Wszystkie silniki oprócz: B6304T2
- Volvo XC70 (2008–)2008Wszystkie silniki oprócz: B6324S
- Volvo XC70 (2008–)2009Tylko silnik: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Tylko silnik: D5244T18, D5244T5
Co oznacza ten kod błędu?
The code concerns the gear lever X position sensor. The engine control module (ECM) continuously receives the gear selector position from the transmission control module (TCM) over the CAN network. The code is set when that message is missing or wrong, for example when the counter in the message is incorrect or is not updated.
Możliwe przyczyny
- Fault on the CAN network
- The root cause is in the transmission control module (TCM)
Co możesz zrobić
- 1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 2Read the fault codes in the transmission control module (TCM) first, as the root cause is there
- 3Read the fault codes in the engine control module and check for other CAN-related codes, as the fault may originate in the CAN network
- 4Try moving the gear selector through all positions and check that the car responds as normal
- 5If you have a diagnostic tool, check in live data that the gear selector position changes as you move the selector
- 6If the fault remains, have a workshop investigate the CAN network and the transmission control module (TCM)
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.