VOLVO
ECM-P083000 - Clutch Pedal Switch A Circuit. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Pokaż modele wg rocznika i silnika (9)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo S60 (2011–)2011–2015Tylko silnik: D4162T
- Volvo S80 (2007–)2012–2015Tylko silnik: D4162T
- Volvo V40 (2013–)2013–2015Tylko silnik: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Tylko silnik: D4162T
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo V60 (2011–)2011–2015Tylko silnik: D4162T
- Volvo V70 (2008–)2012–2015Tylko silnik: D4162T
Co oznacza ten kod błędu?
The ECM compares two clutch pedal switches, A and B, with each other. Switch A is wired to the central electronic module (CEM), which passes its signal to the ECM over CAN. The code is set when the signal from switch A does not change despite several speed increases during the same drive.
Możliwe przyczyny
- The root cause is in the central electronic module (CEM)
- Contact resistance, oxidation or loose connection in the connector
- Damaged signal wire
- Damaged clutch pedal position sensor
Co możesz zrobić
- 1Read the fault codes in the central electronic module (CEM) first, as the root cause is there
- 2Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 3Where possible, check functions linked to the clutch pedal on a test drive to establish the status of the fault
- 4Check that the clutch pedal moves freely and does not stick, and that the position sensor is firmly fixed and correctly adjusted
- 5Check that the connectors at the clutch pedal are firmly seated and free from oxidation and contact resistance
- 6If you have a diagnostic tool, check that switch A changes state in live data as the pedal moves. If not, have a workshop investigate the CEM
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.