VOLVO
ECM-P083500 - Clutch Pedal Switch "B" Circuit High. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
11 modeliC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (29)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo S60 (2011–)2011Tylko silnik: B4164T, B4164T3, D4162T
- Volvo S60 (2011–)2012Wszystkie silniki oprócz: B4204T7, B5254T5, B6304T4
- Volvo S60 (2011–)2013–2014Wszystkie silniki oprócz: B4204T7, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Wszystkie silniki oprócz: B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2011Tylko silnik: B4164T
- Volvo S80 (2007–)2012Tylko silnik: B4164T, B4164T2, D4162T, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013Tylko silnik: B4164T, B4164T2, D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2014Wszystkie silniki oprócz: B4204T6, B4204T7, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2015Wszystkie silniki oprócz: B6304T4, B6324S4, B6324S5
- Volvo V40 (2013–)2013–2014Wszystkie silniki oprócz: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Wszystkie silniki oprócz: B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2014Tylko silnik: B4164T, D4162T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Wszystkie silniki oprócz: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo V60 (2011–)2011Tylko silnik: B4164T, B4164T3, D4162T
- Volvo V60 (2011–)2012Wszystkie silniki oprócz: B4204T7, B6304T4
- Volvo V60 (2011–)2013Wszystkie silniki oprócz: B4204T7, B5204T8, B5204T9, B6304T4, D82PHEV
- Volvo V60 (2011–)2014Wszystkie silniki oprócz: B4204T7, B5204T8, B5204T9, B5254T12, B6304T4, D82PHEV
- Volvo V60 (2011–)2015Wszystkie silniki oprócz: B5204T9, B5254T12, B6304T3, B6304T4, B6304T5, D82PHEV, D87PHEV
- Volvo V70 (2008–)2011Tylko silnik: B4164T
- Volvo V70 (2008–)2012Wszystkie silniki oprócz: B4204T7, B5254T10, B6304T4, B6324S5
- Volvo V70 (2008–)2013–2014Wszystkie silniki oprócz: B4204T7, B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2015Wszystkie silniki oprócz: B5204T9, B6304T4
- Volvo XC60 (2009–)2012Tylko silnik: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013–2014Wszystkie silniki oprócz: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2015Wszystkie silniki oprócz: B4204T7, B5204T9, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2012–2015Wszystkie silniki oprócz: B6304T4, B6324S4, B6324S5
Co oznacza ten kod błędu?
Clutch pedal switch B detects the lower end of the pedal's travel, meaning when the pedal is pressed down, and is used to tell whether the pedal is depressed or released for automatic engine stop-start. The code is set when the switch stays active for a long time during driving with a certain gear engaged.
Możliwe przyczyny
- Contact resistance, oxidation or loose contact in the connector
- Damaged clutch pedal switch B
- Short circuit or break in the connections to the switch
- Damaged signal wire, or a short to voltage on it
- Position switch incorrectly fitted, misadjusted or sticking
- Faulty position switch
Co możesz zrobić
- 1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 2Try automatic stop-start, starting, auto-start and cruise control with the buttons and controls to see whether they are affected
- 3Check that the clutch pedal moves freely, does not stick, and that the connectors at the pedal are firmly seated and free from oxidation
- 4Check that the wiring to switch B has no chafing, crush damage or loose clips, especially where the cable moves
- 5Use a multimeter to check that the wire from switch B has no contact with earth (the body) or positive, and that it has no break
- 6If you have a diagnostic tool, check in live data that switch B changes state as the pedal moves. If the fault remains, have a workshop check the connectors and position switch
Objawy, które możesz zauważyć4
- Automatic engine stop-start does not work while driving
- Automatic engine stop-start does not work at idle
- Starting and auto-start do not work
- Cruise control and its disengagement do not work
Na co może wpływać usterka1
- The automatic engine stop-start function is switched off
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.