VOLVO
ECM-P083F00 - Clutch Pedal Switch A / B Correlation. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
12 modeliC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (23)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo S60 (2011–)2011–2012Tylko silnik: B6304T4
- Volvo S60 (2011–)2013–2014Tylko silnik: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Tylko silnik: B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2008–2010Tylko silnik: D4204T
- Volvo S80 (2007–)2011–2012, 2015Tylko silnik: B6304T4
- Volvo S80 (2007–)2013–2014Tylko silnik: B5254T12, B5254T14, B6304T4
- Volvo V40 (2013–)2013–2014Tylko silnik: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Tylko silnik: B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2015Tylko silnik: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo V60 (2011–)2011–2012Tylko silnik: B6304T4
- Volvo V60 (2011–)2013Tylko silnik: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Tylko silnik: B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Tylko silnik: B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2010Tylko silnik: D4204T
- Volvo V70 (2008–)2011–2012Tylko silnik: B6304T4
- Volvo V70 (2008–)2013–2015Tylko silnik: B5204T9, B6304T4
- Volvo XC60 (2009–)2011–2014Tylko silnik: B6304T4
- Volvo XC60 (2009–)2015Tylko silnik: B5204T9, B5254T12, B5254T14, B6304T4
- Volvo XC70 (2008–)2011–2015Tylko silnik: B6304T4
Co oznacza ten kod błędu?
The ECM compares clutch pedal switches A and B with each other, and the code is set when the signals do not agree. On cars without an electronic parking brake, an extra position switch replaces the position sensor.
Możliwe przyczyny
- Damaged clutch pedal switch
- Loose contact
- Contact resistance or oxidation in connectors or connections
- Wires shorted to earth or to voltage
Co możesz zrobić
- 1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 2Try starting, auto-start and cruise control with the buttons and controls to see whether they are affected
- 3Check that the clutch pedal moves freely and does not stick, and that the connectors at the pedal are firmly seated
- 4Check that the connectors are free from oxidation and contact resistance, and that the cables have not chafed or been pinched
- 5Use a multimeter to check that the wires to the connectors have no contact with earth (the body) or with positive
- 6If you have a diagnostic tool, check in live data that switches A and B change state as the pedal moves. If they do not, have a workshop investigate
Objawy, które możesz zauważyć2
- Starting and auto-start do not work
- Cruise control cannot be engaged
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.