VOLVO
ECM-P085200 - Park / Neutral Switch Input Circuit High. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (8)
- Volvo S60 (2011–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15, D4204T5
- Volvo V40 (2013–)2015Tylko silnik: B4204T11, D4204T14
- Volvo V40 Cross Country (2013–)2015Tylko silnik: B4204T11, D4204T14
- Volvo V60 (2011–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V70 (2008–)2014–2015Tylko silnik: B4204T11, D4204T5
- Volvo XC60 (2009–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo XC70 (2008–)2014–2015Tylko silnik: B4204T11, D4204T5
Co oznacza ten kod błędu?
The code means that the CAN signal from the TCM says starting is allowed, while the signal on the wire from the gear selector says the opposite. The engine control module monitors this to decide whether engine start is allowed, and the fault is checked with the ignition on.
Możliwe przyczyny
- The root cause is in the transmission control module (TCM)
Co możesz zrobić
- 1Look for the root cause in the transmission control module (TCM): read off and remedy its fault codes there first
- 2Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 3If you have a diagnostic tool, check in live data that the selector position agrees with the CAN signal as you move the selector between P/N and other positions
- 4If the fault remains, have a workshop investigate the TCM, where the cause is given as lying
Objawy, które możesz zauważyć2
- The starter drags the engine round slowly and it starts with difficulty
- The engine does not start, at some times or all the time
Na co może wpływać usterka1
- The ECM uses the signal received over CAN instead
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.