VOLVO
ECM-P08AE38 - Neutral Position Sensor "B" Circuit Range/Performance. FM (Frequency Modulated) / PWM (Pulse Width Modulated) Failures. Signal frequency incorrect
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (8)
- Volvo S60 (2011–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo S80 (2007–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15
- Volvo V40 (2013–)2015Tylko silnik: B4204T11
- Volvo V40 Cross Country (2013–)2015Tylko silnik: B4204T11
- Volvo V60 (2011–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T9
- Volvo V70 (2008–)2014–2015Tylko silnik: B4204T11
- Volvo XC60 (2009–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo XC70 (2008–)2014–2015Tylko silnik: B4204T11
Co oznacza ten kod błędu?
The code indicates that the frequency of the signal from neutral position sensor B is wrong. The sensor works with a frequency- and pulse-modulated signal, and the engine control module monitors it while automatic stop-start is active.
Możliwe przyczyny
- Damaged neutral position sensor B
Co możesz zrobić
- 1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 2Check that the connector at neutral position sensor B is firmly seated and free from looseness and oxidation
- 3Check that the sensor is firmly fixed to the gearbox and is not damaged
- 4If you have a diagnostic tool, check in live data that the value for sensor B moves from one position to another when the gear lever is moved
- 5Have a workshop with diagnostic equipment check neutral position sensor B if the fault remains
Objawy, które możesz zauważyć3
- Automatic engine stop-start does not work while driving
- Automatic engine stop-start does not work at idle
- Starting and auto-start do not work
Na co może wpływać usterka1
- The automatic engine stop-start function is switched off
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.