VOLVO
ECM-P0A3B00 - Generator Over Temperature. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
14 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (41)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D5204T, D5204T5
- Volvo S60 (2011–)2011Tylko silnik: B6304T4, D5204T2, D5244T10
- Volvo S60 (2011–)2012Tylko silnik: B6304T4, D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013–2014Wszystkie silniki oprócz: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo S60 (2011–)2015Wszystkie silniki oprócz: B4164T, B4164T2, B4164T3, D4162T
- Volvo S80 (2007–)2007Tylko silnik: D5244T4, D5244T5
- Volvo S80 (2007–)2008Tylko silnik: B4204S3, B4204S4, D5244T4, D5244T5
- Volvo S80 (2007–)2009Tylko silnik: B4204S3, B4204S4, D5244T10, D5244T4, D5244T5
- Volvo S80 (2007–)2010Wszystkie silniki oprócz: B4204T6, B5254T10, B5254T11, B5254T8, D4204T
- Volvo S80 (2007–)2011Wszystkie silniki oprócz: B4164T, B4204T6, B4204T7, B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Tylko silnik: B6304T4, B6324S4, B6324S5, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013–2014Wszystkie silniki oprócz: B4164T, B4164T2, B4204T6, B4204T7, D4162T
- Volvo S80 (2007–)2015Wszystkie silniki oprócz: B4164T, D4162T
- Volvo V40 (2013–)2013Wszystkie silniki oprócz: B4164T, B4164T3, D4162T
- Volvo V40 (2013–)2014–2015Wszystkie silniki oprócz: B4164T, B4164T3, B4164T4, D4162T
- Volvo V40 Cross Country (2013–)2013–2015Wszystkie silniki oprócz: B4164T, D4162T
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D5204T, D5204T5
- Volvo V60 (2011–)2011Tylko silnik: B6304T4, D5204T2, D5244T10
- Volvo V60 (2011–)2012Tylko silnik: B6304T4, D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013–2014Wszystkie silniki oprócz: B4164T, B4164T2, B4164T3, B4204T7, D4162T, D82PHEV
- Volvo V60 (2011–)2015Wszystkie silniki oprócz: B4164T, B4164T2, B4164T3, D4162T, D82PHEV, D87PHEV
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008Tylko silnik: B4204S3, B4204S4, D5244T4, D5244T5
- Volvo V70 (2008–)2009Tylko silnik: B4204S3, B4204S4, D5244T10, D5244T4, D5244T5
- Volvo V70 (2008–)2010Wszystkie silniki oprócz: B4204T6, B5254T10, B5254T11, D4204T
- Volvo V70 (2008–)2011Wszystkie silniki oprócz: B4164T, B4204T6, B4204T7, B5254T10, B5254T11
- Volvo V70 (2008–)2012Tylko silnik: B6304T4, B6324S5, D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013–2014Wszystkie silniki oprócz: B4164T, B4164T2, B4204T7, D4162T
- Volvo V70 (2008–)2015Wszystkie silniki oprócz: B4164T, B4164T2, D4162T
- Volvo XC60 (2009–)2009Wszystkie silniki oprócz: B6304T2
- Volvo XC60 (2009–)2010Wszystkie silniki oprócz: B4204T6
- Volvo XC60 (2009–)2011–2012Wszystkie silniki oprócz: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Wszystkie silniki oprócz: B4204T7
- Volvo XC70 (2008–)2008Wszystkie silniki oprócz: B6324S
- Volvo XC70 (2008–)2009Tylko silnik: D5244T4, D5244T5
- Volvo XC70 (2008–)2010–2015
- Volvo XC90 (2003–)2011–2012Tylko silnik: B6324S5
- Volvo XC90 (2003–)2013–2014Wszystkie silniki oprócz: B5254T9
Co oznacza ten kod błędu?
The generator is controlled by the generator control module (ACM), which receives its instructions from the engine control module over LIN. The code is set when the generator has become too hot according to the status from the ACM. Single occurrences may be entirely normal, and the fault is then most likely due to a combination of high ambient temperature, heavy load and reduced cooling in the engine bay.
Możliwe przyczyny
- One of the fault codes ECM-P065A01 or ECM-P065A07 is stored
- Air intake or air outlet to the generator is blocked
- Reduced airflow or cooling in the engine bay
- Damaged auxiliary drive belt or belt tensioner
- Worn generator brushes (carbon)
- Contact resistance or oxidation in the connectors
Co możesz zrobić
- 1Check that the air intake and air outlet to the generator are not blocked
- 2Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 3Check that the drive belt and belt tensioner are intact and correctly fitted
- 4Where possible, check on a test drive that the electric cooling fan and charging work, to establish the status of the fault
- 5If the fault code is set again after driving, have a workshop check the generator
Objawy, które możesz zauważyć4
- The battery loses voltage or is dead
- The charging warning lights or behaves abnormally
- The electric cooling fan runs all the time while the engine is running
- The engine does not start, either always or on some occasions
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.