VOLVO
ECM-P112400 - Throttle Position Sensor A Out Of Self Test Range. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleS80 (2007–), V70 (2008–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
Although the code is named throttle position sensor A, it concerns the control valve in the inlet, which the engine control module (ECM) controls. The fault is set when the ECM, while controlling the valve, registers that it has jammed in the closed position or is blocked.
Możliwe przyczyny
- Inlet control valve has jammed in the closed position
- Inlet control valve is damaged
Co możesz zrobić
- 1Check that the fuses are intact and that the battery has good voltage
- 2Read and note the code, clear it and road test to see whether it returns
- 3Look for dirt or debris that could block the inlet control valve, and check that it moves freely
- 4Inspect the connector and wiring to the control valve for chafing and loose connections
- 5If you have a diagnostic tool: activate the inlet control valve and listen or feel that it moves
- 6If you find no fault: have a workshop check the control valve
Objawy, które możesz zauważyć1
- Malfunction indicator (check engine) lamp comes on or behaves abnormally
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.