VOLVO
ECM-P114506 - Calculated Torque Error. General Failure Information. Algorithm Based Failures
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (8)
- Volvo S80 (2007–)2007–2009Tylko silnik: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Tylko silnik: D4164T
- Volvo V70 (2008–)2008–2009Tylko silnik: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Tylko silnik: D4164T
- Volvo XC60 (2009–)2009Wszystkie silniki oprócz: B6304T2
- Volvo XC70 (2008–)2008Wszystkie silniki oprócz: B6324S
- Volvo XC70 (2008–)2009Tylko silnik: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Tylko silnik: D5244T18, D5244T5
Co oznacza ten kod błędu?
The engine control module (ECM) compares fuel consumption with the calculated torque. The code is set when fuel consumption is higher than calculated while torque is too low. The cause may be a leak in the fuel or intake system, or a damaged sensor.
Możliwe przyczyny
- Leak in the fuel system
- Leak in the air intake system
- Damaged boost pressure sensor
- Damaged engine speed (RPM) sensor
Co możesz zrobić
- 1Check the fuel system for leaks, for example at hoses and connections
- 2Look for air leaks in the intake system at hoses and clamps
- 3Check that the boost pressure sensor connections are firmly seated and free from oxidation
- 4Check the engine speed sensor connections in the same way
- 5If you have a diagnostic tool: start the engine, vary the speed and compare boost pressure in live data with the calculated value
- 6If you find no fault: have a workshop check the boost pressure sensor and the engine speed sensor
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.