Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-P123811
    VOLVO

    ECM-P123811 - Fuel Pump Secondary Circuit (Fuel Pump Driver Module). General Electrical Failures. Circuit short to ground

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    8 modeli

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Pokaż modele wg rocznika i silnika (8)
    • Volvo S60 (2011–)2014–2015Tylko silnik: D4204T5
    • Volvo S80 (2007–)2014–2015Tylko silnik: D4204T5
    • Volvo V40 (2013–)2015Tylko silnik: D4204T14
    • Volvo V40 Cross Country (2013–)2015Tylko silnik: D4204T14
    • Volvo V60 (2011–)2014–2015Tylko silnik: D4204T5
    • Volvo V70 (2008–)2014–2015Tylko silnik: D4204T5
    • Volvo XC60 (2009–)2014–2015Tylko silnik: D4204T5
    • Volvo XC70 (2008–)2014–2015Tylko silnik: D4204T5

    Co oznacza ten kod błędu?

    The code is set when the engine control module (ECM) finds an electrical fault in the internal circuit that controls the fuel flow and fuel pressure control valves. Here the fault is a short circuit to ground in that circuit.

    Możliwe przyczyny

    • Open circuit or short circuit to supply voltage
    • Open circuit or short circuit on the ground wire
    • Fuel pressure control valve is damaged
    • Fuel flow control valve is damaged
    • The code may be caused by a damaged fuse
    • The engine control module (ECM) itself is faulty

    Co możesz zrobić

    1. 1Check that the fuses are intact, since a damaged fuse can cause this code
    2. 2Clear the code and road test to see whether it returns
    3. 3Check the connectors to the fuel pressure control valve and the fuel flow control valve for contact resistance and oxidation
    4. 4Look at the wires to the valves for breaks and chafing
    5. 5If you find no fault: have a workshop check the valves, the circuit and the engine control module

    Objawy, które możesz zauważyć4

    • Unusual noise while driving, either occasionally or all the time
    • Uneven idle
    • The engine stalls at idle, either occasionally or all the time
    • The engine stalls at steady speed

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.