VOLVO
ECM-P126200 - Cylinder 2 High To Low Side Short. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Pokaż modele wg rocznika i silnika (9)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo S60 (2011–)2011–2015Tylko silnik: D4162T
- Volvo S80 (2007–)2012–2015Tylko silnik: D4162T
- Volvo V40 (2013–)2013–2015Tylko silnik: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Tylko silnik: D4162T
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo V60 (2011–)2011–2015Tylko silnik: D4162T
- Volvo V70 (2008–)2012–2015Tylko silnik: D4162T
Co oznacza ten kod błędu?
This code applies to cylinder 2. The engine control module (ECM) drives the injectors through two integrated high-power output stages, and the code is set when the module detects a faulty signal while the engine is running. The code gives no further fault type. It can be a knock-on fault from a fault found by another trouble code test for the injectors or fuel system, in which case that other code is worked on first.
Możliwe przyczyny
- Knock-on fault from a fault detected by another trouble code test for the injectors and/or fuel system
- Damaged injector
Co możesz zrobić
- 1Check that the fuses are intact. The locations are in the owner's manual or on the fuse box cover.
- 2Look through the stored codes for others linked to the injectors or fuel system and deal with those first, since the cylinder 2 code may be a knock-on from them.
- 3If you have a diagnostic tool, activate the injector for cylinder 2 and listen for a click, then compare with the other cylinders.
- 4Check that the connector to the cylinder 2 injector is secure and free from corrosion.
- 5If the fault returns, have a workshop with diagnostic equipment check the cylinder 2 injector, as it may be damaged.
Objawy, które możesz zauważyć3
- The Check engine (malfunction) lamp comes on or behaves abnormally
- Text message and warning symbol in the display
- Poor performance, the car lacks power
Na co może wpływać usterka2
- Engine output and speed may be limited
- Soot particles are not burned off as normal
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.