VOLVO
ECM-P126300 - Cylinder 3 High To Low Side Short. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Pokaż modele wg rocznika i silnika (9)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo S60 (2011–)2011–2015Tylko silnik: D4162T
- Volvo S80 (2007–)2012–2015Tylko silnik: D4162T
- Volvo V40 (2013–)2013–2015Tylko silnik: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Tylko silnik: D4162T
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo V60 (2011–)2011–2015Tylko silnik: D4162T
- Volvo V70 (2008–)2012–2015Tylko silnik: D4162T
Co oznacza ten kod błędu?
This code applies to cylinder 3. The engine control module (ECM) supplies the injectors from two integrated high-power output stages. The code is set when the module detects a faulty signal to the cylinder 3 injector while the engine is running. It gives no further fault type and can be a knock-on fault from another injector or fuel system circuit.
Możliwe przyczyny
- Knock-on fault from a fault detected by another trouble code test for the injectors and/or fuel system
- Damaged injector
Co możesz zrobić
- 1Check the fuses first: confirm they are intact. The locations are in the owner's manual or on the fuse box cover.
- 2Check whether there are other codes for the injectors or fuel system, and deal with those first.
- 3If you have a diagnostic tool, listen for a click when the cylinder 3 injector is activated, and compare with the other cylinders.
- 4Inspect the connector to the cylinder 3 injector and check that it is secure and free from corrosion.
- 5If the fault remains, have a workshop check the cylinder 3 injector with diagnostic equipment.
Objawy, które możesz zauważyć3
- The Check engine (malfunction) lamp comes on or behaves abnormally
- Text message and warning symbol in the display
- Poor performance, the car lacks power
Na co może wpływać usterka2
- Engine output and speed may be limited
- Soot particles are not burned off as normal
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.