ECM-P13307B
VOLVO
ECM-P13307B - Injector Control Pressure Lower Than Desired (engine running). Mechanical Failures. Low fluid level
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (8)
- Volvo S60 (2011–)2014–2015Tylko silnik: D4204T5
- Volvo S80 (2007–)2014–2015Tylko silnik: D4204T5
- Volvo V40 (2013–)2015Tylko silnik: D4204T14
- Volvo V40 Cross Country (2013–)2015Tylko silnik: D4204T14
- Volvo V60 (2011–)2014–2015Tylko silnik: D4204T5
- Volvo V70 (2008–)2014–2015Tylko silnik: D4204T5
- Volvo XC60 (2009–)2014–2015Tylko silnik: D4204T5
- Volvo XC70 (2008–)2014–2015Tylko silnik: D4204T5
Co oznacza ten kod błędu?
This code concerns a fuel pressure that is too low on the high-pressure side. The engine control module (ECM) compares the pressure with the largest permitted deviation below the correct value, and the check is made with the engine running. A low fuel level in the tank is one of the causes, but leaks, air, a blocked filter and damaged control valves can also cause the fault.
Możliwe przyczyny
- Low fuel level in the tank
- Waxing of diesel at low fuel temperatures
- Internal or external fuel leak on the high-pressure side, or poor fuel supply on the low-pressure side
- Blocked fuel filter
- Damaged fuel flow control valve or fuel pressure control valve
- Air in the fuel system
Co możesz zrobić
- 1Start with the simplest check: look at the fuel level in the tank and top up if it is low.
- 2Deal with any fault codes for the fuel pump first.
- 3Search the fuel system for leaks, and have a workshop check whether the fuel filter is blocked.
- 4If you have a diagnostic tool, compare the measured and requested fuel pressure in live data at idle. The difference should be small.
- 5Have a workshop check the injector valves, the fuel flow control valve and the connectors and wiring of the fuel pressure sensor.
Objawy, które możesz zauważyć4
- The engine does not start, but the starter motor turns
- Poor performance, the car lacks power, especially when pulling away from a standstill
- Uneven idle
- The engine stalls, both at idle and while driving
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.