VOLVO
ECM-P133600 - Crankshaft/Camshaft Sensor Range/Performance. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (8)
- Volvo S60 (2011–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15, D4204T5
- Volvo V40 (2013–)2015Tylko silnik: B4204T11, D4204T14
- Volvo V40 Cross Country (2013–)2015Tylko silnik: B4204T11, D4204T14
- Volvo V60 (2011–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V70 (2008–)2014–2015Tylko silnik: B4204T11, D4204T5
- Volvo XC60 (2009–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo XC70 (2008–)2014–2015Tylko silnik: B4204T11, D4204T5
Co oznacza ten kod błędu?
The pulse sensor gives the engine control module (ECM) information about crankshaft rotation and how many teeth pass the sensor. The module uses the signal to calculate engine speed. The code is set when the ECM receives an incorrect number of crankshaft teeth per revolution, or when the sensor does not see the gap where teeth are missing on the crankshaft.
Możliwe przyczyny
- Contact resistance and oxidation in the connections
- Pulse sensor fitted incorrectly
- Damaged pulse sensor
- Contact resistance or oxidation in the pulse sensor connector
- Damage to the flywheel or carrier plate
Co możesz zrobić
- 1Check that the fuses are intact. The locations are in the owner's manual or on the fuse box cover.
- 2Check the pulse sensor connector and connections. They should be secure and free from oxide and corrosion.
- 3Check that the pulse sensor is fitted firmly and in the correct position.
- 4Look for high-current cables, such as the starter motor cable, that lie too close to the pulse sensor or its wiring and can disturb the signal.
- 5Have a workshop check the flywheel reference holes, as damage there can also cause the fault.
Objawy, które możesz zauważyć5
- The Check engine (malfunction) lamp comes on or behaves abnormally
- Poor performance, the car lacks power, especially when pulling away from a standstill
- The engine hesitates, surges or runs unevenly, at unclear times
- The engine does not start, and when the fault shows is unclear
- Text message and warning symbol in the display
Na co może wpływać usterka1
- The maximum engine speed is limited
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.