VOLVO
ECM-P133668 - Crankshaft/Camshaft Sensor Range/Performance. Algorithm Based Failures. Event information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)
Pokaż modele wg rocznika i silnika (12)
- Volvo S60 (2011–)2011Tylko silnik: B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Tylko silnik: B4204T7
- Volvo S80 (2007–)2010Tylko silnik: B4204T6
- Volvo S80 (2007–)2011–2014Tylko silnik: B4204T6, B4204T7
- Volvo V60 (2011–)2011Tylko silnik: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Tylko silnik: B4204T7
- Volvo V70 (2008–)2010Tylko silnik: B4204T6
- Volvo V70 (2008–)2011Tylko silnik: B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Tylko silnik: B4204T7
- Volvo XC60 (2009–)2010Tylko silnik: B4204T6
- Volvo XC60 (2009–)2011–2012Tylko silnik: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Tylko silnik: B4204T7
Co oznacza ten kod błędu?
This is an event-controlled information code. It does not indicate a fault in the engine control module but is intended as information, and it disappears by itself when the conditions no longer apply. The module verifies the camshaft's position against the crankshaft's position. The fault can be due to a camshaft set incorrectly after a timing belt change, a camshaft fitted wrongly, or a damaged camshaft.
Możliwe przyczyny
- Incorrectly adjusted camshaft after timing belt replacement
- Incorrectly installed camshaft
- Damaged camshaft
Co możesz zrobić
- 1This is a knock-on fault. Deal with any other fault codes first.
- 2If the timing belt was recently replaced, the camshaft position may be wrong. Have a workshop check it.
- 3The code does not need clearing in advance. It disappears when the conditions no longer apply.
- 4If the code is still present once the other faults are dealt with, have a workshop check the camshaft.
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.