VOLVO
ECM-P146321 - A/C Pressure Sensor Insufficient Pressure Change. General Signal Failures. Signal too low
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (6)
- Volvo S80 (2007–)2007–2009Tylko silnik: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Tylko silnik: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Wszystkie silniki oprócz: B6304T2
- Volvo XC70 (2008–)2008Wszystkie silniki oprócz: B6324S
- Volvo XC70 (2008–)2009Tylko silnik: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Tylko silnik: D5244T18, D5244T5
Co oznacza ten kod błędu?
Pressure in the A/C system is watched by the engine control module (ECM). The code is set when the pressure does not rise as expected on the high-pressure side when the compressor starts, and the signal from the sensor is too low. The fault can be checked when the A/C is switched on.
Możliwe przyczyny
- Leak in the A/C system
- Damaged pressure sensor
- Damaged A/C compressor
Co możesz zrobić
- 1Check that the fuses are intact. Their location is in the owner's manual or on the fuse box cover.
- 2Switch on the air conditioning at maximum cooling and check that the compressor engages. Listen for a click when it starts.
- 3With the ignition off, check the connector at the A/C pressure sensor for looseness, contact resistance and corrosion.
- 4If you have a diagnostic tool, read the pressure from the A/C pressure sensor with the A/C on, and check that it rises when the compressor runs.
- 5If the compressor engages but the cooling is absent, or if the fault remains, have a workshop check the A/C system for leaks and the compressor.
Objawy, które możesz zauważyć1
- The air conditioning does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.