Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-P155500
    VOLVO

    ECM-P155500 - Cylinder 5 Injector Circuit Range/Performance. General Failure Information. No sub type information

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    5 modeli

    S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Pokaż modele wg rocznika i silnika (6)
    • Volvo S80 (2007–)2007–2009Tylko silnik: D5244T4, D5244T5
    • Volvo V70 (2008–)2008–2009Tylko silnik: D5244T4, D5244T5
    • Volvo XC60 (2009–)2009Wszystkie silniki oprócz: B6304T2
    • Volvo XC70 (2008–)2008Wszystkie silniki oprócz: B6324S
    • Volvo XC70 (2008–)2009Tylko silnik: D5244T4, D5244T5
    • Volvo XC90 (2003–)2013–2014Tylko silnik: D5244T18, D5244T5

    Co oznacza ten kod błędu?

    The engine control module (ECM) monitors the signal to the injection valve for cylinder 5. The code is set when the signal to that valve is incorrect.

    Możliwe przyczyny

    • Contact resistance or corrosion in the connectors
    • Open circuit in the signal wire
    • With fault code ECM-P120512: the signal wire is shorted to voltage, or the injection valve is damaged
    • With fault code ECM-P120511: a short between the signal wires, or the signal wire is shorted to ground

    Co możesz zrobić

    1. 1Cylinder 5 is the fifth cylinder counted from the right-hand side of the vehicle, with cylinder 1 furthest from the flywheel.
    2. 2Check that the fuses are intact. Their location is in the owner's manual or on the fuse box cover.
    3. 3Check the connector to the cylinder 5 injection valve for contact resistance and corrosion.
    4. 4With the ignition off, use a multimeter to check that the signal wire to the cylinder 5 valve has no break and no contact with ground or voltage.
    5. 5If the fault remains, have a workshop check the cylinder 5 injection valve and its control.

    Objawy, które możesz zauważyć1

    • The engine may be hard to start, or not start at all, and this may be noticeable all the time or only now and then

    Na co może wpływać usterka1

    • Injection from cylinder 5 stops

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.