VOLVO
ECM-P155585 - Cylinder 5 Injector Circuit Range/Performance. Bus Signal / Message Failures. Signal above allowable range
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (6)
- Volvo S80 (2007–)2007–2009Tylko silnik: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Tylko silnik: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Wszystkie silniki oprócz: B6304T2
- Volvo XC70 (2008–)2008Wszystkie silniki oprócz: B6324S
- Volvo XC70 (2008–)2009Tylko silnik: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Tylko silnik: D5244T18, D5244T5
Co oznacza ten kod błędu?
The code concerns the injection valve for cylinder 5 and is set when something is wrong with the engine control module's control of it. The fault may be caused by contact resistance and corrosion at the connector, or by the valve being clogged or leaking.
Możliwe przyczyny
- Contact resistance and corrosion in the injection valve connector
- The injection valve is clogged or leaking
Co możesz zrobić
- 1Check that the connector to the cylinder 5 valve is firmly seated and has no play.
- 2With the ignition off, use a multimeter to check that the wire to the valve is not shorted to ground (the body).
- 3If you have a diagnostic tool, activate the cylinder 5 injection valve and listen for it working.
- 4Cylinder 5 is the fifth cylinder counted from the right-hand side of the vehicle, with cylinder 1 furthest from the flywheel.
- 5Look at the cable to the valve and check whether it is chafed or pinched.
- 6If nothing is found in these checks, the fault may lie in the engine control module, which is a job for a workshop.
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.