VOLVO
ECM-P157400 - Throttle position sensor output signals are not correct. General malfunction information. No information on malfunction type
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelXC90 (2003–)
Pokaż modele wg rocznika i silnika (1)
Co oznacza ten kod błędu?
The engine control module (ECM) compares the signals from the two position sensors in the throttle body and sets the code when the difference between them becomes too large. If one of the signals is faulty, the control uses the other signal instead.
Możliwe przyczyny
- Contact resistance or corrosion in the connections
- Damaged throttle body
Co możesz zrobić
- 1Check that the connector to the throttle body is firmly seated and free from damp and corrosion.
- 2With the ignition off, disconnect the connector and check that the contact surfaces are clean and undamaged.
- 3If you have a diagnostic tool, read both throttle position sensor values in live data with the ignition on, and check that they follow each other when the accelerator pedal is pressed.
- 4If the fault remains, have a workshop check the throttle body.
Objawy, które możesz zauważyć2
- The engine performs poorly
- The cruise control does not work at all
Na co może wpływać usterka2
- If one of the signals is faulty, the other signal is used
- The cruise control is switched off for as long as the fault is active
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.