VOLVO
ECM-P158800 - Throttle Control Detected Loss Of Return Spring. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (24)
- Volvo S60 (2011–)2011Tylko silnik: B4204T6, B4204T7
- Volvo S60 (2011–)2012–2013Tylko silnik: B4204T7
- Volvo S60 (2011–)2014Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T7, B4204T9, D4204T5
- Volvo S60 (2011–)2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2010Tylko silnik: B4204T6
- Volvo S80 (2007–)2011–2013Tylko silnik: B4204T6, B4204T7
- Volvo S80 (2007–)2014Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T6, B4204T7, D4204T5
- Volvo S80 (2007–)2015Tylko silnik: B4204T11, B4204T12, B4204T15, D4204T5
- Volvo V40 (2013–)2015Tylko silnik: B4204T11, D4204T14
- Volvo V40 Cross Country (2013–)2015Tylko silnik: B4204T11, D4204T14
- Volvo V60 (2011–)2011Tylko silnik: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2013Tylko silnik: B4204T7
- Volvo V60 (2011–)2014Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T7, B4204T9, D4204T5
- Volvo V60 (2011–)2015Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V70 (2008–)2010Tylko silnik: B4204T6
- Volvo V70 (2008–)2011Tylko silnik: B4204T6, B4204T7
- Volvo V70 (2008–)2012–2013Tylko silnik: B4204T7
- Volvo V70 (2008–)2014Tylko silnik: B4204T11, B4204T7, D4204T5
- Volvo V70 (2008–)2015Tylko silnik: B4204T11, D4204T5
- Volvo XC60 (2009–)2010Tylko silnik: B4204T6
- Volvo XC60 (2009–)2011–2012Tylko silnik: B4204T6, B4204T7
- Volvo XC60 (2009–)2013Tylko silnik: B4204T7
- Volvo XC60 (2009–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T7, B4204T9, D4204T5
- Volvo XC70 (2008–)2014–2015Tylko silnik: B4204T11, D4204T5
Co oznacza ten kod błędu?
Although the code is named as a loss of return spring, the condition is that the throttle does not return within a reasonable time during the check. When the engine is switched off, the engine control module (ECM) runs a mechanical check by moving the throttle to the open position and measuring how long it takes to return to its rest position.
Możliwe przyczyny
- The throttle sticks or is blocked, for example by dirt, oil film or ice
- Contact resistance or corrosion at the throttle body connector to the ECM
- Open circuit or short to ground or voltage in the wires to the throttle motor
- The wires to the throttle motor are shorted to each other
- Damaged throttle body
Co możesz zrobić
- 1Check that the fuses are intact. Their location is in the owner's manual or on the fuse box cover.
- 2Check that the throttle moves freely by hand when the engine is off, and that it is not blocked by dirt or oil film.
- 3If the throttle is dirty, have a workshop clean the throttle body.
- 4With the ignition off, use a multimeter to check that the wires to the throttle motor have no break and no contact with ground or voltage.
- 5Check the connectors between the engine control module and the throttle body for looseness, contact resistance and corrosion.
Objawy, które możesz zauważyć4
- The engine performs poorly or lacks power
- The idle is uneven
- The check engine lamp lights or behaves abnormally
- Yellow warning symbol and text message in the display
Na co może wpływać usterka1
- Depending on the nature of the fault, the power to the throttle motor may be switched off, so the throttle goes to its spring-return position
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.