VOLVO
ECM-P159368 - Cruise Control Monitor Fault. Algorithm Based Failures. Event information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (8)
- Volvo S60 (2011–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15, D4204T5
- Volvo V40 (2013–)2015Tylko silnik: B4204T11, D4204T14
- Volvo V40 Cross Country (2013–)2015Tylko silnik: B4204T11, D4204T14
- Volvo V60 (2011–)2014–2015Tylko silnik: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V70 (2008–)2014–2015Tylko silnik: B4204T11, D4204T5
- Volvo XC60 (2009–)2014–2015Tylko silnik: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo XC70 (2008–)2014–2015Tylko silnik: B4204T11, D4204T5
Co oznacza ten kod błędu?
The code is event controlled, so it is an information code that does not show a fault in the engine control module. It is set when information the cruise control needs is missing or unreasonable, for example during excessive acceleration from low speed, and it clears when the conditions no longer apply.
Możliwe przyczyny
- The code can be set without any fault needing correction
- The cause may lie in the central electronics control module (CEM)
- The cause may lie in the brake control module (BCM)
- Short circuit between the CAN wires
- Loose connections or contact resistance in the connections to the CAN network
Co możesz zrobić
- 1Clear the fault code and check whether it returns after you have used the cruise control for a while.
- 2If the code returns, read the fault codes in the brake control module (BCM) and the central electronics control module (CEM), and correct them first.
- 3Do not work on the braking system yourself. Have a workshop check the brake control module if it has fault codes.
- 4If the fault remains, have a workshop check the CAN network.
Objawy, które możesz zauważyć1
- The cruise control cannot be engaged
Na co może wpływać usterka1
- The cruise control is switched off for as long as the fault is active
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.