VOLVO
ECM-P160919 - Diagnostic Lamp Driver. General Electrical Failures. Circuit current above threshold
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelXC90 (2003–)
Pokaż modele wg rocznika i silnika (1)
Co oznacza ten kod błędu?
The engine control module (ECM) controls the general warning lamp over the CAN bus to the driver information module (DIM). The code is set when the engine control module detects a fault on the signal to the warning lamp, described here as excessive current. Fault-tracing is primarily carried out in the driver information module.
Możliwe przyczyny
- Fault in the driver information module (DIM)
Co możesz zrobić
- 1Check that the fuses are intact. Their locations are given in the owner's manual
- 2Check with buttons or controls in the car whether the functions that are normally controlled work as they should
- 3Use a multimeter to check that the wire to the warning lamp has no contact with earth (the body)
- 4Check that the connectors to the instrument cluster are firmly seated and free from corrosion
- 5If the fault code returns: have a workshop fault-trace the driver information module (DIM)
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Na co może wpływać usterka1
- The general warning lamp is switched off
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.