Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-P163287
    VOLVO

    ECM-P163287 - Smart Alternator Faults Sensor / Circuit. Bus Signal / Message Failures. Missing message

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    5 modeli

    S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Pokaż modele wg rocznika i silnika (11)
    • Volvo S80 (2007–)2007Tylko silnik: D5244T4, D5244T5
    • Volvo S80 (2007–)2008–2009Tylko silnik: D4204T, D5244T4, D5244T5
    • Volvo S80 (2007–)2010Tylko silnik: D4164T, D4204T
    • Volvo S80 (2007–)2011Tylko silnik: D4164T
    • Volvo V70 (2008–)2008–2009Tylko silnik: D4204T, D5244T4, D5244T5
    • Volvo V70 (2008–)2010Tylko silnik: D4164T, D4204T
    • Volvo V70 (2008–)2011Tylko silnik: D4164T
    • Volvo XC60 (2009–)2009Wszystkie silniki oprócz: B6304T2
    • Volvo XC70 (2008–)2008Wszystkie silniki oprócz: B6324S
    • Volvo XC70 (2008–)2009Tylko silnik: D5244T4, D5244T5
    • Volvo XC90 (2003–)2013–2014Tylko silnik: D5244T18, D5244T5

    Co oznacza ten kod błędu?

    The engine control module (ECM) communicates with the alternator control module (ACM) over LIN communication. The fault code is set when messages from the ACM are missing, or when the ECM otherwise detects a fault in the communication. The generator can then charge with a fixed voltage.

    Możliwe przyczyny

    • Open circuit on the signal wire or on one of the LIN wires
    • Contact resistance or oxidation in the connections
    • Short circuit between the LIN wires
    • Internal fault in another control module on the same part of the LIN network
    • Damaged alternator control module (ACM), meaning the charge regulator
    • A generator with a charge regulator not designed for LIN communication is fitted

    Co możesz zrobić

    1. 1Check that the connectors to the charge regulator are firmly seated and free from oxide
    2. 2Use a multimeter to check that the signal wire between the control modules has no break and is not short-circuited to earth or battery positive
    3. 3Have a diagnostic tool: start the engine and follow the generator charging current in live data to see whether it changes as it should
    4. 4Check that the correct type of generator with charge regulator is fitted to the car
    5. 5If the fault code returns: have a workshop check the LIN communication and the charge regulator

    Objawy, które możesz zauważyć5

    • The battery may be dead or have low voltage
    • The charge warning lamp lights or behaves abnormally
    • The generator or charge regulator may cause power supply problems
    • The engine is hard to start and cranks slowly during start attempts
    • The engine hesitates during acceleration

    Na co może wpływać usterka1

    • The charge regulator charges with a fixed voltage

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.