VOLVO
ECM-P193B00 - Throttle/Pedal Signal. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Pokaż modele wg rocznika i silnika (11)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo S60 (2011–)2011–2015Tylko silnik: D4162T
- Volvo S80 (2007–)2008–2010Tylko silnik: D4204T
- Volvo S80 (2007–)2012–2015Tylko silnik: D4162T
- Volvo V40 (2013–)2013–2015Tylko silnik: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Tylko silnik: D4162T
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo V60 (2011–)2011–2015Tylko silnik: D4162T
- Volvo V70 (2008–)2008–2010Tylko silnik: D4204T
- Volvo V70 (2008–)2012–2015Tylko silnik: D4162T
Co oznacza ten kod błędu?
The position of the accelerator pedal is sent in analogue form to the central electronic module (CEM), which passes the information on to the engine control module (ECM) over the CAN network. The ECM also monitors the accelerator pedal with two sensors and compares them with each other. The code is set when the ECM judges the pedal position from the analogue sensor to be incorrect, or when the CEM reports that its information is incorrect.
Możliwe przyczyny
- Contact resistance, oxidation or loose contact in the connectors
- Damaged accelerator pedal position sensor
- Fault in the central electronic module (CEM)
- Short circuit to ground or supply voltage, or an open circuit, in the signal cable from the accelerator pedal sensor
- Open circuit or short circuit in the power supply or ground lead to the accelerator pedal sensor
Co możesz zrobić
- 1Check that the fuses are intact
- 2Check that the accelerator pedal returns fully and does not stick
- 3Check the connectors to the accelerator pedal sensor and to the central electronic module for play, oxidation and damage
- 4If you have a diagnostic tool: check in live data that the accelerator pedal position changes smoothly when the pedal is pressed and released
- 5If the fault remains, have a workshop with diagnostic equipment check the accelerator pedal sensor and the central electronic module
Objawy, które możesz zauważyć3
- Warning symbol and text message shown in the driver information display
- Check engine warning lamp lights or behaves abnormally
- The car runs with poor performance and lacks power
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.