VOLVO
ECM-P200977 - Intake Manifold Runner Control Circuit Low (Bank 1). Mechanical Failures. Commanded position not reachable
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (8)
- Volvo S60 (2011–)2014–2015Tylko silnik: D4204T5
- Volvo S80 (2007–)2014–2015Tylko silnik: D4204T5
- Volvo V40 (2013–)2015Tylko silnik: D4204T14
- Volvo V40 Cross Country (2013–)2015Tylko silnik: D4204T14
- Volvo V60 (2011–)2014–2015Tylko silnik: D4204T5
- Volvo V70 (2008–)2014–2015Tylko silnik: D4204T5
- Volvo XC60 (2009–)2014–2015Tylko silnik: D4204T5
- Volvo XC70 (2008–)2014–2015Tylko silnik: D4204T5
Co oznacza ten kod błędu?
The engine control module (ECM) checks how the swirl damper motor works. Although the code is named commanded position not reachable, it applies when the learning of the swirl damper motor's closed end position has failed. The code is only tested after a drive, once the test conditions are met.
Możliwe przyczyny
- Defective swirl damper motor
- The swirl damper is jammed or has stuck
Co możesz zrobić
- 1Check that the swirl damper can move freely and has not stuck in its end position
- 2After a drive, use a diagnostic tool, if you have one, to check whether the code is active
- 3Check that the connectors to the swirl damper motor are secure and free from oxidation
- 4If the fault remains, have a workshop check the swirl damper motor and carry out a new learning of the closed end position
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.