VOLVO
ECM-P201500 - Intake Manifold Runner Position Sensor/Switch Circuit Range/Perf. (Bank 1). General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (14)
- Volvo S60 (2011–)2014–2015Tylko silnik: D4204T5
- Volvo S80 (2007–)2007–2009Tylko silnik: D5244T4, D5244T5
- Volvo S80 (2007–)2014–2015Tylko silnik: D4204T5
- Volvo V40 (2013–)2015Tylko silnik: D4204T14
- Volvo V40 Cross Country (2013–)2015Tylko silnik: D4204T14
- Volvo V60 (2011–)2014–2015Tylko silnik: D4204T5
- Volvo V70 (2008–)2008–2009Tylko silnik: D5244T4, D5244T5
- Volvo V70 (2008–)2014–2015Tylko silnik: D4204T5
- Volvo XC60 (2009–)2009Wszystkie silniki oprócz: B6304T2
- Volvo XC60 (2009–)2014–2015Tylko silnik: D4204T5
- Volvo XC70 (2008–)2008Wszystkie silniki oprócz: B6324S
- Volvo XC70 (2008–)2009Tylko silnik: D5244T4, D5244T5
- Volvo XC70 (2008–)2014–2015Tylko silnik: D4204T5
- Volvo XC90 (2003–)2013–2014Tylko silnik: D5244T18, D5244T5
Co oznacza ten kod błędu?
The ECM runs a learning routine for the swirl damper position, and the code is set when that routine is judged incorrect. It can also be set when the damper reaches its position too slowly and deviates from the calculated position. The learning is checked with the engine switched off, while the comparison with the calculated position is made with the engine running.
Możliwe przyczyny
- Linkage or swirl damper sticking
- Damaged linkage between the swirl throttle motor and the swirl duct
- Swirl throttle motor sticking
- Defective swirl damper motor
Co możesz zrobić
- 1Check whether the arm between the swirl motor and the swirl duct has come loose
- 2Check that the linkage and the swirl duct move freely and are not damaged
- 3Check that the swirl throttle motor is not sticking and is not damaged
- 4If you have a diagnostic tool: read the swirl damper position in live data with the engine running and check that it follows the calculated position
- 5Clear the code only once the mechanics have been checked, then see whether it returns
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.