VOLVO
ECM-P210900 - Throttle / Pedal Position Sensor A Minimum Stop Performance. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
7 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Pokaż modele wg rocznika i silnika (27)
- Volvo S60 (2011–)2011Wszystkie silniki oprócz: B6304T4, D4162T, D5204T2, D5244T10
- Volvo S60 (2011–)2012Tylko silnik: B4164T, B4164T2, B4164T3, B4204T7, B5254T5
- Volvo S60 (2011–)2013–2014Tylko silnik: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Tylko silnik: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2007–2008Tylko silnik: B5254T6
- Volvo S80 (2007–)2009Tylko silnik: B5254T6, B5254T8
- Volvo S80 (2007–)2010Tylko silnik: B4204T6, B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2011Tylko silnik: B4164T, B4204T6, B4204T7, B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Tylko silnik: B4164T, B4164T2, B4204T6, B4204T7, B5254T10
- Volvo S80 (2007–)2013–2014Tylko silnik: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Tylko silnik: B4164T
- Volvo V40 (2013–)2013Tylko silnik: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Tylko silnik: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Tylko silnik: B4164T
- Volvo V60 (2011–)2011Tylko silnik: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Tylko silnik: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Tylko silnik: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2008Tylko silnik: B5254T6
- Volvo V70 (2008–)2009Tylko silnik: B5254T6, B5254T8
- Volvo V70 (2008–)2010Tylko silnik: B4204T6, B5254T10, B5254T11
- Volvo V70 (2008–)2011Tylko silnik: B4164T, B4204T6, B4204T7, B5254T10, B5254T11
- Volvo V70 (2008–)2012Tylko silnik: B4164T, B4164T2, B4204T7, B5254T10
- Volvo V70 (2008–)2013–2014Tylko silnik: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Tylko silnik: B4164T, B4164T2
- Volvo XC60 (2009–)2010Tylko silnik: B4204T6
- Volvo XC60 (2009–)2011–2012Tylko silnik: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Tylko silnik: B4204T7
Co oznacza ten kod błędu?
This code concerns the first potentiometer in the throttle position sensor. It is set when an adaptation by the engine control module fails, for example because an internal fault has occurred in the amplifier for the signal, or because the mechanical stop position of the throttle has been exceeded. The adaptation keeps the throttle unit's values within the values stored in the control module.
Możliwe przyczyny
- Damaged engine control module
- The throttle sticks or is blocked, for example by oil film or dust
- Contact resistance or oxidation in the connections between the control module and the throttle unit
- Damaged throttle unit
Co możesz zrobić
- 1First fix any other stored fault codes, since they may be the reason the adaptation does not complete
- 2Check that the fuses are intact
- 3With the ignition on, read the throttle unit adaptation parameter in live data. It should show OK once the adaptation is complete
- 4Check that the throttle does not stick or is not blocked by dirt, and clean the throttle unit if needed
- 5Check the connectors at the throttle unit and the engine control module for contact resistance and oxidation
- 6If the fault remains, have a workshop with diagnostic equipment check the throttle unit and the engine control module
Objawy, które możesz zauważyć2
- The engine hesitates or surges at steady speed
- The engine may stall, and it cannot be said when
Na co może wpływać usterka2
- The control module ignores the signal from the first potentiometer in the throttle position sensor
- The control module uses values from earlier successful adaptations
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.