Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-P211107
    VOLVO

    ECM-P211107 - Throttle Actuator Control System - Stuck Open. General Failure Information. Mechanical Failures

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    5 modeli

    S60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)

    Pokaż modele wg rocznika i silnika (12)
    • Volvo S60 (2011–)2011Tylko silnik: B4204T6, B4204T7
    • Volvo S60 (2011–)2012–2014Tylko silnik: B4204T7
    • Volvo S80 (2007–)2010Tylko silnik: B4204T6
    • Volvo S80 (2007–)2011–2014Tylko silnik: B4204T6, B4204T7
    • Volvo V60 (2011–)2011Tylko silnik: B4204T6, B4204T7
    • Volvo V60 (2011–)2012–2014Tylko silnik: B4204T7
    • Volvo V70 (2008–)2010Tylko silnik: B4204T6
    • Volvo V70 (2008–)2011Tylko silnik: B4204T6, B4204T7
    • Volvo V70 (2008–)2012–2014Tylko silnik: B4204T7
    • Volvo XC60 (2009–)2010Tylko silnik: B4204T6
    • Volvo XC60 (2009–)2011–2012Tylko silnik: B4204T6, B4204T7
    • Volvo XC60 (2009–)2013–2015Tylko silnik: B4204T7

    Co oznacza ten kod błędu?

    The fault is mechanical: during an adaptation attempt the module sees that the throttle movement is blocked, or that the throttle's return spring is not doing its job properly.

    Możliwe przyczyny

    • The throttle sticks or is blocked, for example by oil film or dust
    • Contact resistance or oxidation between the control module and the throttle unit
    • An open circuit, or a short to ground or supply voltage, in the wiring to the throttle motor
    • The wires to the throttle motor have shorted to each other
    • Damaged throttle unit

    Co możesz zrobić

    1. 1Check that the fuses are intact
    2. 2Read the code and note it down
    3. 3Check that the throttle moves freely and is not blocked by dirt or an object, and clean the throttle unit if needed
    4. 4Check the connectors at the throttle unit and the engine control module for contact resistance and oxidation
    5. 5Look for breaks and shorts in the wiring to the throttle motor, and use a multimeter to confirm it has no contact with ground or supply voltage
    6. 6If the fault remains after these steps, have a workshop carry out the throttle adaptation and check that it completes

    Objawy, które możesz zauważyć3

    • The engine lacks power and performs poorly
    • The Check engine light comes on or behaves abnormally
    • A text message and a warning symbol appear in the display

    Na co może wpływać usterka1

    • Depending on the fault, the control module may cut the supply to the throttle motor, and the throttle then tries to return to its spring-loaded position

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.