VOLVO
ECM-P211977 - Throttle Actuator Control Throttle Body Range/Performance. Mechanical Failures. Commanded position not reachable
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
7 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Pokaż modele wg rocznika i silnika (20)
- Volvo S60 (2011–)2011Tylko silnik: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Tylko silnik: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Tylko silnik: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Tylko silnik: B4204T6
- Volvo S80 (2007–)2011Tylko silnik: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Tylko silnik: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Tylko silnik: B4164T
- Volvo V40 (2013–)2013Tylko silnik: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Tylko silnik: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Tylko silnik: B4164T
- Volvo V60 (2011–)2011Tylko silnik: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Tylko silnik: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Tylko silnik: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Tylko silnik: B4204T6
- Volvo V70 (2008–)2011Tylko silnik: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Tylko silnik: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Tylko silnik: B4164T, B4164T2
- Volvo XC60 (2009–)2010Tylko silnik: B4204T6
- Volvo XC60 (2009–)2011–2012Tylko silnik: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Tylko silnik: B4204T7
Co oznacza ten kod błędu?
With the engine running, the engine control module has noticed that the desired throttle position (the set value) and the actual throttle position (the measured value) do not match. The fault may be mechanical, but it can also come from poor contact or a wiring fault.
Możliwe przyczyny
- The throttle sticks or is blocked, for example by oil film or dust
- Contact resistance or oxidation in the connections between the control module and the throttle unit
- An open circuit, or a short to ground or supply voltage, in the wiring to the throttle motor
- The wires to the throttle motor have shorted to each other
- Damaged throttle unit
Co możesz zrobić
- 1Read the codes in the control module first. Codes for the throttle unit, the position sensor and the control module must be dealt with first
- 2Check that the throttle is not sticking or blocked, and clean the throttle unit if needed
- 3Check the connectors at the throttle unit and the engine control module for contact resistance and oxidation
- 4Look for breaks and chafing in the wiring to the throttle motor, and use a multimeter to check that it is not shorted to ground, supply voltage or other wires
- 5If the code comes back, have a workshop with diagnostic equipment check the throttle unit and the engine control module
Objawy, które możesz zauważyć1
- Uneven idle
Na co może wpływać usterka1
- The throttle motor receives no supply, and the throttle is turned to its spring-loaded position
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.