VOLVO
ECM-P212037 - Throttle/Pedal Position Sensor/Switch D Circuit. FM (Frequency Modulated) / PWM (Pulse Width Modulated) Failures. Signal frequency too high
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
12 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (40)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D5204T, D5204T5
- Volvo S60 (2011–)2011Tylko silnik: D5204T2, D5244T10
- Volvo S60 (2011–)2012Tylko silnik: D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013–2014Tylko silnik: D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Tylko silnik: D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2009Tylko silnik: D5244T10
- Volvo S80 (2007–)2010Tylko silnik: D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Tylko silnik: D5204T2, D5244T10
- Volvo S80 (2007–)2012Tylko silnik: D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013–2014Tylko silnik: D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Tylko silnik: D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Tylko silnik: D5204T4, D5204T6
- Volvo V40 (2013–)2015Tylko silnik: D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Tylko silnik: D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Tylko silnik: D5204T6
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D5204T, D5204T5
- Volvo V60 (2011–)2011Tylko silnik: D5204T2, D5244T10
- Volvo V60 (2011–)2012Tylko silnik: D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Tylko silnik: D5204T3, D5204T7, D5244T11, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2014Tylko silnik: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2015Tylko silnik: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23, D82PHEV, D87PHEV
- Volvo V70 (2008–)2009Tylko silnik: D5244T10
- Volvo V70 (2008–)2010Tylko silnik: D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Tylko silnik: D5204T2, D5244T10
- Volvo V70 (2008–)2012Tylko silnik: D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Tylko silnik: D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
- Volvo V70 (2008–)2014–2015Tylko silnik: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2010Tylko silnik: D5244T10, D5244T14, D5244T16
- Volvo XC60 (2009–)2011Tylko silnik: D5204T2, D5244T10, D5244T16
- Volvo XC60 (2009–)2012Tylko silnik: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013Wszystkie silniki oprócz: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Tylko silnik: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Tylko silnik: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2010Tylko silnik: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2011Tylko silnik: D5204T2, D5244T10, D5244T16
- Volvo XC70 (2008–)2012–2013Wszystkie silniki oprócz: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Tylko silnik: D5204T3, D5244T11, D5244T12, D5244T15, D5244T17
Co oznacza ten kod błędu?
The engine control module, which monitors the accelerator pedal sensor, sets the code when it finds that the PWM signal from the sensor has too high a frequency. The cause may be an open circuit or a short in the signal or supply wire, or a damaged pedal sensor.
Możliwe przyczyny
- An open circuit in the signal wire
- The signal wire is short-circuited to ground
- The signal wire is short-circuited to supply voltage
- The supply wire is short-circuited to ground
- The supply wire is short-circuited to supply voltage
- Damaged accelerator pedal position sensor
Co możesz zrobić
- 1Check that the fuses are intact
- 2Check that the connectors at the pedal sensor and the engine control module are secure and free from oxidation
- 3Look for a break in the signal wire, and use a multimeter to confirm it has no contact with ground or supply voltage
- 4If you have a diagnostic tool, check whether the pedal position in live data rises and falls smoothly as the pedal is pressed and released
- 5If the fault remains, have a workshop with diagnostic equipment check the pedal sensor and its supply wire
Objawy, które możesz zauważyć4
- A text message and a warning symbol appear in the display
- The engine hesitates or surges, and it is unclear when
- The engine hesitates or jerks during acceleration
- The engine hesitates or jerks during deceleration
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.