VOLVO
ECM-P212186 - Throttle/Pedal Position Sensor/Switch D Circuit Range/Performance. Bus Signal / Message Failures. Signal invalid
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
7 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Pokaż modele wg rocznika i silnika (20)
- Volvo S60 (2011–)2011Tylko silnik: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Tylko silnik: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Tylko silnik: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Tylko silnik: B4204T6
- Volvo S80 (2007–)2011Tylko silnik: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Tylko silnik: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Tylko silnik: B4164T
- Volvo V40 (2013–)2013Tylko silnik: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Tylko silnik: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Tylko silnik: B4164T
- Volvo V60 (2011–)2011Tylko silnik: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Tylko silnik: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Tylko silnik: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Tylko silnik: B4204T6
- Volvo V70 (2008–)2011Tylko silnik: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Tylko silnik: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Tylko silnik: B4164T, B4164T2
- Volvo XC60 (2009–)2010Tylko silnik: B4204T6
- Volvo XC60 (2009–)2011–2012Tylko silnik: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Tylko silnik: B4204T7
Co oznacza ten kod błędu?
The engine control module monitors the accelerator pedal position sensor, and the code is set when the signal from the analogue position sensor shows an incorrect pedal position. The fault may lie in the signal wire, in the supply wire, which is either broken or shorted, or in the pedal sensor itself.
Możliwe przyczyny
- An open circuit in the signal wire
- The signal wire is short-circuited to ground
- The signal wire is short-circuited to supply voltage
- The sensor's supply feed is short-circuited to ground
- The sensor's supply feed is short-circuited to supply voltage
- Damaged accelerator pedal position sensor
Co możesz zrobić
- 1Check that the fuses are intact
- 2If you have a diagnostic tool, read the pedal position in live data while pressing and releasing the pedal slowly, and check that the values change smoothly and match each other
- 3Check the connectors at the pedal sensor and the engine control module for contact resistance and oxidation
- 4Look for breaks and chafing in the supply and ground wires to the sensor, and use a multimeter to confirm the supply is normal battery voltage
- 5If the fault remains, have a workshop with diagnostic equipment check the pedal sensor and its wiring
Objawy, które możesz zauważyć3
- A text message and a warning symbol appear in the display
- The engine lacks power and performs poorly
- The engine hesitates or surges, and it is unclear when
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.