Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-P212568
    VOLVO

    ECM-P212568 - Throttle/Pedal Position Sensor/Switch E Circuit. Algorithm Based Failures. Event information

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    3 modele

    S60 (2011–), S80 (2007–), V70 (2008–)

    Pokaż modele wg rocznika i silnika (9)
    • Volvo S60 (2011–)2011–2012Tylko silnik: B5254T5
    • Volvo S80 (2007–)2007–2008Tylko silnik: B5254T6
    • Volvo S80 (2007–)2009Tylko silnik: B5254T6, B5254T8
    • Volvo S80 (2007–)2010–2011Tylko silnik: B5254T10, B5254T11, B5254T8
    • Volvo S80 (2007–)2012Tylko silnik: B5254T10
    • Volvo V70 (2008–)2008Tylko silnik: B5254T6
    • Volvo V70 (2008–)2009Tylko silnik: B5254T6, B5254T8
    • Volvo V70 (2008–)2010–2011Tylko silnik: B5254T10, B5254T11
    • Volvo V70 (2008–)2012Tylko silnik: B5254T10

    Co oznacza ten kod błędu?

    This is an event-controlled information code. It does not mean that the control module where it is active has a fault; it is there for information. The code shows that a message from the central electronic module (CEM) about the accelerator pedal signal or the CAN communication has reached the engine control module. If the code is on its own, there is no fault that needs fixing.

    Możliwe przyczyny

    • This code does not stem from a fault needing action, unless another fault code is set alongside it
    • The fault the message refers to is in the central electronic module (CEM)

    Co możesz zrobić

    1. 1Read the fault codes in both the engine control module and the central electronic module (CEM) and see whether this code is on its own
    2. 2If it is on its own there is no fault to fix, because there is no fault-tracing for this code itself
    3. 3If another fault code is stored with it, fix that one first, starting with the faults in CEM
    4. 4If you have a diagnostic tool and other codes are present, read the accelerator pedal value in live data and check that it follows the pedal movement

    Objawy, które możesz zauważyć1

    • No noticeable symptoms for the driver

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.