Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-P213800
    VOLVO

    ECM-P213800 - Throttle/Pedal Position Sensor/Switch D / E Voltage Correlation. General Failure Information. No sub type information

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Ten kod błędu ma różne znaczenie w zależności od modelu, rocznika lub silnika. Wybierz znaczenie, które dotyczy Twojego samochodu.

    Dotyczy następujących modeli:

    14 modeli

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Pokaż modele wg rocznika i silnika (30)
    • Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T, D5204T, D5204T5
    • Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
    • Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
    • Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
    • Volvo S60 (2011–)2011–2013
    • Volvo S60 (2011–)2014–2015Wszystkie silniki oprócz: D4204T5
    • Volvo S80 (2007–)2007Tylko silnik: B5254T6
    • Volvo S80 (2007–)2008Tylko silnik: B4204S3, B4204S4, B5254T6, D4204T
    • Volvo S80 (2007–)2009Wszystkie silniki oprócz: B6304T2, B6324S, B8444S, D5244T4, D5244T5
    • Volvo S80 (2007–)2010–2011Wszystkie silniki oprócz: D4164T
    • Volvo S80 (2007–)2012–2013
    • Volvo S80 (2007–)2014–2015Wszystkie silniki oprócz: D4204T5
    • Volvo V40 (2013–)2013–2014
    • Volvo V40 (2013–)2015Wszystkie silniki oprócz: D4204T14
    • Volvo V40 Cross Country (2013–)2013–2014
    • Volvo V40 Cross Country (2013–)2015Wszystkie silniki oprócz: D4204T14
    • Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
    • Volvo V60 (2011–)2011–2013
    • Volvo V60 (2011–)2014–2015Wszystkie silniki oprócz: D4204T5
    • Volvo V60 Cross Country (2015–)2015
    • Volvo V70 (2008–)2008Tylko silnik: B4204S3, B4204S4, B5254T6, D4204T
    • Volvo V70 (2008–)2009Wszystkie silniki oprócz: B6304T2, B6324S, D5244T4, D5244T5
    • Volvo V70 (2008–)2010–2011Wszystkie silniki oprócz: D4164T
    • Volvo V70 (2008–)2012–2013
    • Volvo V70 (2008–)2014–2015Wszystkie silniki oprócz: D4204T5
    • Volvo XC60 (2009–)2010–2013
    • Volvo XC60 (2009–)2014–2015Wszystkie silniki oprócz: D4204T5
    • Volvo XC70 (2008–)2010–2013
    • Volvo XC70 (2008–)2014–2015Wszystkie silniki oprócz: D4204T5
    • Volvo XC90 (2003–)2011–2014Tylko silnik: B6324S5

    Co oznacza ten kod błędu?

    The engine control module (ECM) monitors two pedal signals, PWM and analogue. The code is set when the PWM signal is faulty or the difference between the two signals is too great. The fault may lie in the pedal sensor, its connectors, the ground wire or the CAN network. The code can also follow from another fault code stored in the control module.

    Możliwe przyczyny

    • Contact resistance or oxidation in the connections between the pedal sensor and the engine control module
    • Damaged accelerator pedal sensor
    • Fault in the CAN communication between the engine control module and CEM
    • Fault in the pedal sensor PWM signal
    • Open circuit in the ground lead
    • The fault may be caused by another fault code stored in the control module

    Co możesz zrobić

    1. 1With a diagnostic tool, read the pedal value in live data while the pedal is pressed and released; the value should follow the movement
    2. 2Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
    3. 3Check the connectors at the pedal sensor and the engine control module for contact resistance and oxidation
    4. 4Use a multimeter to check that the ground lead to the pedal sensor has no open circuit
    5. 5Have a workshop with diagnostic equipment check the CAN wires for open circuit and short circuit
    6. 6If these checks show no other fault and the fault remains, the pedal sensor may need replacing

    Objawy, które możesz zauważyć4

    • Poor response from the accelerator pedal
    • Cruise control does not work at all
    • Yellow warning symbol and a message in the display
    • Accelerator pedal ignored when braking

    Na co może wpływać usterka3

    • The accelerator pedal stops working while the brake pedal is pressed
    • Engine torque and output may be limited
    • The speed limiter is not available

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.