Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-P215904
    VOLVO

    ECM-P215904 - Vehicle Speed Sensor B Range/Performance. General Failure Information. System Internal Failures

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    3 modele

    S60 (2011–), S80 (2007–), V70 (2008–)

    Pokaż modele wg rocznika i silnika (9)
    • Volvo S60 (2011–)2011–2012Tylko silnik: B5254T5
    • Volvo S80 (2007–)2007–2008Tylko silnik: B5254T6
    • Volvo S80 (2007–)2009Tylko silnik: B5254T6, B5254T8
    • Volvo S80 (2007–)2010–2011Tylko silnik: B5254T10, B5254T11, B5254T8
    • Volvo S80 (2007–)2012Tylko silnik: B5254T10
    • Volvo V70 (2008–)2008Tylko silnik: B5254T6
    • Volvo V70 (2008–)2009Tylko silnik: B5254T6, B5254T8
    • Volvo V70 (2008–)2010–2011Tylko silnik: B5254T10, B5254T11
    • Volvo V70 (2008–)2012Tylko silnik: B5254T10

    Co oznacza ten kod błędu?

    The engine control module (ECM) compares the speed readings from the brake control module (BCM) and the transmission control module (TCM), and it judges the TCM reading to be of too poor quality. This is a follow-on code set in the ECM. The fault starts in TCM, and the code can only be erased once it has been fixed.

    Możliwe przyczyny

    • Faulty speed signal from transmission control (TCM)
    • Contact resistance in the CAN connections
    • Open circuit in one or both CAN wires

    Co możesz zrobić

    1. 1Read the fault codes in the transmission control module (TCM) first, since the root fault is there
    2. 2Fix the fault in TCM and then erase the code in the engine control module
    3. 3Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
    4. 4Check the connectors at the CAN connections for loose contacts and oxidation
    5. 5With a diagnostic tool, compare the TCM speed value with the speedometer during a test drive
    6. 6Road test the car after the repair and check that the idle is smooth and that the code does not return

    Objawy, które możesz zauważyć2

    • The malfunction indicator lamp (MIL) is lit
    • The idle is uneven

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.