VOLVO
ECM-P229900 - Brake Pedal Position/Accelerator Pedal Position Incompatible. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleS80 (2007–), V70 (2008–)
Pokaż modele wg rocznika i silnika (6)
Co oznacza ten kod błędu?
The module keeps watch on the brake light switch. The code is set when readings from the brake pedal sensor and the brake light switch contradict each other.
Możliwe przyczyny
- Loose connections or contact resistance and oxidation in the terminals
- Damaged brake light switch
- Damaged brake pedal position sensor
- Loose contact or contact resistance in the accelerator pedal switch
- Wiring is shorted to earth or supply voltage
- Open circuit in the cable to the accelerator pedal switch
Co możesz zrobić
- 1Clear the code, drive the car in normal driving and read again to see whether it returns
- 2Check that the connectors at the brake pedal and the accelerator pedal are secure and not corroded
- 3Use a multimeter to check that the wires to the accelerator pedal switch and the brake light switch have no break and are not shorted to earth or supply voltage
- 4If the fault remains, have a workshop with diagnostic equipment check the brake pedal sensor and the brake light switch
- 5Do not drive longer than necessary with the fault active, as the engine control then cannot rely on the pedal signals
Objawy, które możesz zauważyć1
- Text message and warning symbol in the display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.