Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-P233800
    VOLVO

    ECM-P233800 - Cylinder #3 Above Knock Threshold. General Failure Information. No sub type information

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    2 modele

    S80 (2007–), V70 (2008–)

    Pokaż modele wg rocznika i silnika (2)
    • Volvo S80 (2007–)2008–2011Tylko silnik: B4204S3, B4204S4
    • Volvo V70 (2008–)2008–2011Tylko silnik: B4204S3, B4204S4

    Co oznacza ten kod błędu?

    The knock sensor on the engine block is used by the engine control module (ECM) to monitor combustion knock, and the ignition is adjusted when needed. The code is set once knocking from cylinder 3 rises above a certain level, and

    Możliwe przyczyny

    • The engine runs on a fuel/air mixture that is too lean
    • Poor fuel quality, for example summer fuel in winter
    • The engine is overheated
    • The intake air temperature is too high
    • The knock sensor is loosely fitted
    • The knock sensor is damaged

    Co możesz zrobić

    1. 1Check that the relevant fuses are intact; their locations are shown in the car's owner's manual
    2. 2Read and note the code, clear it and test drive to see whether it returns
    3. 3Check that the knock sensor is firmly fitted and that its connector is free from corrosion
    4. 4Check that the fuel in use is right for the season
    5. 5If you have a diagnostic tool, see whether the intake air temperature in live data follows the outside temperature
    6. 6If the fault returns, have a workshop with diagnostic equipment check the knock sensor and the engine's fuel/air mixture

    Objawy, które możesz zauważyć1

    • The engine performs poorly

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.