Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    ECM-P233900
    VOLVO

    ECM-P233900 - Cylinder #4 Above Knock Threshold. General Failure Information. No sub type information

    Układ

    Sterownik silnika (ECM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    2 modele

    S80 (2007–), V70 (2008–)

    Pokaż modele wg rocznika i silnika (2)
    • Volvo S80 (2007–)2008–2011Tylko silnik: B4204S3, B4204S4
    • Volvo V70 (2008–)2008–2011Tylko silnik: B4204S3, B4204S4

    Co oznacza ten kod błędu?

    The engine control module (ECM) listens for combustion knock through a knock sensor on the engine block and retards the ignition when needed to stop the knock continuing. The code is set once knocking from cylinder 4 rises above a certain level, and

    Możliwe przyczyny

    • The engine runs on a fuel/air mixture that is too lean
    • Poor fuel quality, for example summer fuel in winter
    • The engine is overheated
    • The intake air temperature is too high
    • The knock sensor is loosely fitted
    • The knock sensor is damaged

    Co możesz zrobić

    1. 1The fuses should be intact; their locations are shown in the car's owner's manual
    2. 2Inspect the connector and cable to the knock sensor for loose contacts, corrosion and chafing
    3. 3Check that the knock sensor is firmly fitted to the engine block
    4. 4Check that the fuel is right for the season and that the engine has not overheated
    5. 5If you have a diagnostic tool, compare the intake air temperature in live data with the outside air temperature
    6. 6If the fault returns, have a workshop with diagnostic equipment check the knock sensor and the engine's fuel/air mixture

    Objawy, które możesz zauważyć1

    • The engine performs poorly

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.