VOLVO
ECM-P241400 - O2 Sensor Exhaust Sample Error Bank 1, Sensor 1. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Pokaż modele wg rocznika i silnika (24)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo S60 (2011–)2011Tylko silnik: B4164T, B4164T3, B5254T5, D4162T
- Volvo S60 (2011–)2012Tylko silnik: B4164T, B4164T2, B4164T3, B5254T5, D4162T
- Volvo S60 (2011–)2013–2015Tylko silnik: B4164T, B4164T2, B4164T3, D4162T
- Volvo S80 (2007–)2007–2008Tylko silnik: B5254T6
- Volvo S80 (2007–)2009Tylko silnik: B5254T6, B5254T8
- Volvo S80 (2007–)2010Tylko silnik: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2011Tylko silnik: B4164T, B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Tylko silnik: B4164T, B4164T2, B5254T10, D4162T
- Volvo S80 (2007–)2013–2014Tylko silnik: B4164T, B4164T2, D4162T
- Volvo S80 (2007–)2015Tylko silnik: B4164T, D4162T
- Volvo V40 (2013–)2013Tylko silnik: B4164T, B4164T3, D4162T
- Volvo V40 (2013–)2014–2015Tylko silnik: B4164T, B4164T3, B4164T4, D4162T
- Volvo V40 Cross Country (2013–)2013–2015Tylko silnik: B4164T, D4162T
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo V60 (2011–)2011Tylko silnik: B4164T, B4164T3, D4162T
- Volvo V60 (2011–)2012–2015Tylko silnik: B4164T, B4164T2, B4164T3, D4162T
- Volvo V70 (2008–)2008Tylko silnik: B5254T6
- Volvo V70 (2008–)2009Tylko silnik: B5254T6, B5254T8
- Volvo V70 (2008–)2010Tylko silnik: B5254T10, B5254T11
- Volvo V70 (2008–)2011Tylko silnik: B4164T, B5254T10, B5254T11
- Volvo V70 (2008–)2012Tylko silnik: B4164T, B4164T2, B5254T10, D4162T
- Volvo V70 (2008–)2013–2015Tylko silnik: B4164T, B4164T2, D4162T
Co oznacza ten kod błędu?
The engine control module (ECM) checks the signal from the front oxygen sensor, which measures the fuel/air mixture in the exhaust gases. The code is set when the signal is incorrect, for example if the sensor only indicates air and no mixture. The fault applies to bank 1 and sensor 1, that is, the front sensor on the first bank.
Możliwe przyczyny
- Incorrectly installed heated oxygen sensor
- Damaged front heated oxygen sensor
- Poor contact or oxidation at connectors or joints
- Damaged heated oxygen sensor
Co możesz zrobić
- 1Check that the oxygen sensor is correctly installed in the exhaust system
- 2Inspect the oxygen sensor connector for loose contacts and oxidation. Do not use rust-solvent spray or grease in the connector
- 3Use a multimeter to check that the wires to the oxygen sensor have no open circuit
- 4If the fault remains after these checks, have a workshop try a new oxygen sensor
- 5If the fault still remains, have a workshop decide whether the engine control module has an internal fault, which is remedied by replacing the module
Objawy, które możesz zauważyć2
- The malfunction indicator lamp lights up
- The engine warning lamp (Check engine) lights up or behaves abnormally
Na co może wpływać usterka2
- The oxygen sensor control is disabled
- The catalytic converter diagnostics are disabled
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.