VOLVO
ECM-P244A00 - Diesel Particulate Filter Differential Pressure Too Low(Bank1). General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Ten kod błędu ma różne znaczenie w zależności od modelu, rocznika lub silnika. Wybierz znaczenie, które dotyczy Twojego samochodu.
Dotyczy następujących modeli:
12 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (41)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011Tylko silnik: D4162T, D5204T2, D5244T10
- Volvo S60 (2011–)2012Tylko silnik: D4162T, D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013–2014Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2009Tylko silnik: D5244T10
- Volvo S80 (2007–)2010Tylko silnik: D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Tylko silnik: D5204T2, D5244T10
- Volvo S80 (2007–)2012Tylko silnik: D4162T, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013–2014Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Tylko silnik: D4162T, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Tylko silnik: D4162T, D5204T4, D5204T6
- Volvo V40 (2013–)2015Tylko silnik: D4162T, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Tylko silnik: D4162T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Tylko silnik: D4162T, D5204T6
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011Tylko silnik: D4162T, D5204T2, D5244T10
- Volvo V60 (2011–)2012Tylko silnik: D4162T, D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2014Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2015Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23, D82PHEV, D87PHEV
- Volvo V70 (2008–)2009Tylko silnik: D5244T10
- Volvo V70 (2008–)2010Tylko silnik: D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Tylko silnik: D5204T2, D5244T10
- Volvo V70 (2008–)2012Tylko silnik: D4162T, D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
- Volvo V70 (2008–)2014Tylko silnik: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo V70 (2008–)2015Wszystkie silniki oprócz: B4164T, B4164T2, B4204T11, B5204T9, B6304T4, D4204T5
- Volvo XC60 (2009–)2010Tylko silnik: D5244T10, D5244T14, D5244T16
- Volvo XC60 (2009–)2011Tylko silnik: D5204T2, D5244T10, D5244T16
- Volvo XC60 (2009–)2012Tylko silnik: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013Wszystkie silniki oprócz: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Tylko silnik: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Tylko silnik: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2010Tylko silnik: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2011Tylko silnik: D5204T2, D5244T10, D5244T16
- Volvo XC70 (2008–)2012–2013Wszystkie silniki oprócz: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Tylko silnik: D5204T3, D5244T11, D5244T12, D5244T15, D5244T17
Co oznacza ten kod błędu?
The fault applies to bank 1 and means the differential pressure across the particle filter is too low according to the control module. The engine control module (ECM) measures the pressure upstream and downstream of the particle filter and sets the code when the sensor value falls below the permitted level.
Możliwe przyczyny
- Software fault in the engine control module
- No particle filter fitted
- Clogged or damaged hose or pipe to the pressure sensor
- Hoses to the pressure sensor have been swapped
- Damaged particle filter
- Damaged particle filter pressure sensor
Co możesz zrobić
- 1Look at the hoses and pipes to the pressure sensor for damage, swapped connections and blockage; they should be correctly connected and clear
- 2Check that the connectors to the pressure sensor are firmly seated and free from oxidation
- 3If you have a diagnostic tool, read the pressure sensor signal in live data with the engine off and at idle, and compare the two values
- 4If the fault remains after these checks, have a workshop check the control module software, since a software fault can cause the code; reload it only if it is damaged
- 5Have a workshop decide whether the particle filter is missing, damaged or needs replacing
Objawy, które możesz zauważyć3
- The engine warning lamp (Check engine) lights up or behaves abnormally
- A warning symbol and a text message appear in the display
- The car runs poorly and lacks power
Na co może wpływać usterka3
- Torque is limited
- Exhaust gas recirculation (EGR) control is lost
- Burning of soot particles does not take place
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.