Co oznacza kod błędu ECM-P245317?

Diagnostyka i definicja kodu błędu dla ECM-P245317 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo V40 (2013–)). Zamów naprawę w OBD Tuning.

VOLVO

ECM-P245317 - Diesel Particulate Filter Pressure Sensor "A" Circuit Range/Performance. General Electrical Failures. Circuit voltage above threshold

Układ

Sterownik silnika (ECM)

Modele Volvo, których dotyczy ten kod błędu

Dotyczy następujących modeli:

8 modeli

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Pokaż modele wg rocznika i silnika (8)

Co oznacza ten kod błędu?

Although the code is named circuit voltage above threshold, it applies when the zero-point adaptation of the particle filter pressure sensor is wrong. When this happens the control module uses a calculated value instead of the sensor signal.

Możliwe przyczyny

Damaged pressure sensor for the particle filter
Pipes or hoses to the sensor are mixed up
Pinched or folded hoses between the pressure sensor and the particle filter

Co możesz zrobić

1Look at the hoses between the pressure sensor and the particle filter for pinched or folded sections
2Make sure the hoses to the pressure sensor are not swapped round
3Look at the connectors at the pressure sensor for looseness and oxidation
4Do not disconnect the control module connector yourself; have a workshop measure the signal wire with diagnostic equipment
5If the fault remains after a new service regeneration, have a workshop decide whether the particle filter needs replacing

Objawy, które możesz zauważyć1

The engine warning lamp (Check engine) lights up or behaves abnormally

Na co może wpływać usterka1

The control module uses a calculated value instead

Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.