VOLVO
ECM-P246300 - Diesel Particulate Filter Restriction - Soot Accumulation (Bank 1). General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Ten kod błędu ma różne znaczenie w zależności od modelu, rocznika lub silnika. Wybierz znaczenie, które dotyczy Twojego samochodu.
Dotyczy następujących modeli:
11 modeliC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (17)
- Volvo C30 (2007–2013)2011–2013Tylko silnik: D4162T
- Volvo S40 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo S60 (2011–)2011–2013Tylko silnik: D4162T
- Volvo S60 (2011–)2014–2015Tylko silnik: D4162T, D4204T5
- Volvo S80 (2007–)2012–2013Tylko silnik: D4162T
- Volvo S80 (2007–)2014–2015Tylko silnik: D4162T, D4204T5
- Volvo V40 (2013–)2013–2014Tylko silnik: D4162T
- Volvo V40 (2013–)2015Tylko silnik: D4162T, D4204T14
- Volvo V40 Cross Country (2013–)2013–2014Tylko silnik: D4162T
- Volvo V40 Cross Country (2013–)2015Tylko silnik: D4162T, D4204T14
- Volvo V50 (2004–2013)2011–2012Tylko silnik: D4162T
- Volvo V60 (2011–)2011–2013Tylko silnik: D4162T
- Volvo V60 (2011–)2014–2015Tylko silnik: D4162T, D4204T5
- Volvo V70 (2008–)2012–2013Tylko silnik: D4162T
- Volvo V70 (2008–)2014–2015Tylko silnik: D4162T, D4204T5
- Volvo XC60 (2009–)2014–2015Tylko silnik: D4204T5
- Volvo XC70 (2008–)2014–2015Tylko silnik: D4204T5
Co oznacza ten kod błędu?
The ECM tracks how much soot is in the diesel particulate filter. The code is stored as a first level when the soot level has exceeded a certain limit and the pressure difference across the filter is too great. If the soot level keeps rising, ECM-P24A400 is also stored.
Możliwe przyczyny
- Clogged particle filter with too much soot in it
- Soot combustion insufficient or blocked
- Increased soot generation by the engine, for example from an EGR fault or air leakage in the intake
- Air leakage in the intake system
- Damaged pressure sensor for the particle filter
- The vehicle has been driven a lot in urban traffic
Co możesz zrobić
- 1If you have a diagnostic tool, read the amount of soot in the particle filter to see how much soot it holds
- 2Drive the car a longer distance on country roads, preferably with cruise control, so that the engine control module can start soot combustion during normal driving
- 3If the particle filter fills quickly or often, look for leaks and damage in the intake system, for example in hoses and pipes
- 4Check that the connector at the particle filter pressure sensor is secure and free from oxidation
- 5If ECM-P24A400 is also stored, have a workshop diagnose that code
Objawy, które możesz zauważyć2
- The Check engine lamp may come on or behave abnormally
- Yellow warning symbol and text message in the display
Na co może wpływać usterka2
- EGR control does not take place
- Soot combustion does not take place
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.