VOLVO
ECM-P250A00 - Engine Oil Level Sensor Circuit. General Failure Information. No sub type information
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
8 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–)
Pokaż modele wg rocznika i silnika (13)
- Volvo S60 (2011–)2013–2015Tylko silnik: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo S80 (2007–)2008–2011Tylko silnik: B4204S3, B4204S4
- Volvo S80 (2007–)2013–2014Tylko silnik: B5254T12, B5254T14
- Volvo V40 (2013–)2013–2014Tylko silnik: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Tylko silnik: B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2015Tylko silnik: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V60 (2011–)2013Tylko silnik: B5204T8, B5204T9
- Volvo V60 (2011–)2014Tylko silnik: B5204T8, B5204T9, B5254T12
- Volvo V60 (2011–)2015Tylko silnik: B5204T9, B5254T12
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2011Tylko silnik: B4204S3, B4204S4
- Volvo V70 (2008–)2013–2015Tylko silnik: B5204T9
- Volvo XC60 (2009–)2015Tylko silnik: B5204T9, B5254T12, B5254T14
Co oznacza ten kod błędu?
The ECM reads the oil level sensor signal. The code is stored when that signal is too high or too low, or when two consecutive readings differ by an unreasonable amount. The causes are open circuits in the power supply, the signal wire or the earth lead, or a damaged oil level sensor.
Możliwe przyczyny
- Open circuit in the power supply
- Open circuit in the signal wire
- Open circuit in the earth lead
- Damaged oil level sensor
Co możesz zrobić
- 1If you have a diagnostic tool, read the oil level value in live data a few times with the engine running and see whether it jumps sharply between readings
- 2Check that the relevant fuses are intact
- 3Check the connector to the oil level sensor for contact resistance and oxidation
- 4Use a multimeter to check that the power supply, signal wire and earth lead to the oil level sensor have no open circuit
- 5If the fault remains after these checks, have a workshop with diagnostic equipment check the oil level sensor
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.