VOLVO
ECM-P250A17 - Engine Oil Level Sensor Circuit. General Electrical Failures. Circuit voltage above threshold
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Pokaż modele wg rocznika i silnika (6)
- Volvo S80 (2007–)2007–2009Tylko silnik: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Tylko silnik: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Wszystkie silniki oprócz: B6304T2
- Volvo XC70 (2008–)2008Wszystkie silniki oprócz: B6324S
- Volvo XC70 (2008–)2009Tylko silnik: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Tylko silnik: D5244T18, D5244T5
Co oznacza ten kod błędu?
The ECM keeps track of engine oil level. The code is stored when the calculated value falls outside its permitted range. Diesel can mix into the oil during particle filter regeneration, which raises the oil level, and then the code for low oil quality may be stored at the same time.
Możliwe przyczyny
- Oil level too high
Co możesz zrobić
- 1Check the oil level with the dipstick to see whether it really is too high
- 2If the engine oil is diluted with diesel, an oil change is needed. If the level is too high, excess oil can be drained out
- 3Have a workshop adapt the control module's calculated oil level to the actual level after an oil change or draining
- 4If the code for low oil quality is also stored, they often have the same cause, so fault-trace them together
Objawy, które możesz zauważyć2
- Incorrect fluid level in the lubrication system
- Text message in the display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.