VOLVO
ECM-P250B64 - Engine Oil Level Sensor Circuit Intermittent/Erratic. Algorithm Based Failures. Signal plausibility failure
Układ
Sterownik silnika (ECM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
3 modeleS60 (2011–), S80 (2007–), V70 (2008–)
Pokaż modele wg rocznika i silnika (9)
- Volvo S60 (2011–)2011–2012Tylko silnik: B5254T5
- Volvo S80 (2007–)2007–2008Tylko silnik: B5254T6
- Volvo S80 (2007–)2009Tylko silnik: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Tylko silnik: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Tylko silnik: B5254T10
- Volvo V70 (2008–)2008Tylko silnik: B5254T6
- Volvo V70 (2008–)2009Tylko silnik: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Tylko silnik: B5254T10, B5254T11
- Volvo V70 (2008–)2012Tylko silnik: B5254T10
Co oznacza ten kod błędu?
The fault is recorded as intermittent, which means it has been present but is not necessarily present now. The ECM monitors the sensor output and stores the code when it falls outside a reasonable operating range. This may be caused by an oil level that is too high or a damaged oil level sensor.
Możliwe przyczyny
- Oil level too high
- Damaged oil level sensor
Co możesz zrobić
- 1Read the fault status with the engine idling. If the code is not active, the fault may be sporadic
- 2Check the oil level with the dipstick and see whether it is above the marked level
- 3Check that the relevant fuses are intact
- 4If you have a diagnostic tool, read the oil level value in live data at idle and compare it with the dipstick
- 5If the fault returns, have a workshop with diagnostic equipment check the oil level sensor
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.